JANUS? 2020 Hand-Held Computer (4MB) - Intermec

JANUS 2020 Hand-Held Computer User’s Manual (4MB) NF BC
6-28
Now the reader’s drives appear on the host computer, as if they were
physically located on the host computer. The host computer has its original
drives A, B, C, and D, plus drives G, H, I, and K.
Drive I on the host computer is really the physical RAM drive E on the reader.
Anything you do to the host computer’s drive I affects the reader’s drive E.
You can type standard DOS commands on the host computer’s keyboard to
access the directories and files in the reader’s drives. For example, to display a
list of files located in the root directory of the reader’s drive E, type this
command on the host computer:
dir i:\
To copy a file from a directory on the host computer’s drive C to the reader’s
drive E, type this command on the host computer:
copy c:\shared\data\accounts.txt i:\accounts.txt
Interlnk System Requirements
Your host computer and reader must meet these requirements to run Interlnk
and Intersvr:
• A serial port is available on the host computer and reader.
• The host computer is running DOS 3.0 or higher.
• The client has 16K of free memory.
• The server has 130K of free memory.
• The reader is connected to the host computer through a communications
dock or optical link adapter. If you use the communications dock, you must
connect the dock to the host computer with a 3-wire (2, 3, and 7) cable for
Interlnk to operate properly.