JANUS? 2020 Hand-Held Computer (4MB) - Intermec

JANUS 2020 Hand-Held Computer User’s Manual (4MB) NF BC
4-12
Preparing to Use ATA Cards
To use an ATA flash card in the PC card drive, you need to:
1. Configure the reader to use an ATA card by selecting the ATA card option
on the MS-DOS Startup menu.
2. Initialize and format the ATA card.
3. Use the ATA card.
Initializing and Formatting an ATA Card
Follow these steps to initialize and format the ATA card:
1. Insert the ATA card in the PC card drive.
2. Type this command at the DOS prompt:
atainit {drive:}
where drive is the PC card drive.
Note: ATAINIT only works with ATA cards that are supported by the
ATADRV.EXE driver. If you are unable to use your ATA card, it may be an
unsupported card. Check the documentation shipped with the ATA card.
Caution
Make sure you enter the correct drive letter when you initialize the ATA
card or you may erase the wrong drive.
Conseil
Assurez-vous de ne pas faire d’erreur en tapant la lettre identifiant le
lecteur pour le formatage de la carte ATA. Sinon, vous risquez d’effacer un
lecteur incorrect.
The program displays the parameters (Fixed Cylinders, Heads, and
Physical Sectors) for your ATA card. The next prompt is:
Here are the parameters that were returned, examine
them carefully to ensure they match what was expected.
Press ENTER to accept and continue or to prompt.
Note: You can press at any time to abort and exit the initialization program.
3. Press to accept the values that are displayed. The next prompt is:
Do you wish a compact format?