JANUS? 2020 Hand-Held Computer (4MB) - Intermec

NF BC Learning About the Software
3
4. Copy all the files you want to add or edit to your working directory.
If you want to edit files that are on drive C including the startup files, you
can use Interlnk to copy files to your working directory on the host
computer. Then you can edit the files and include them in the new image
file for drive C. You can also copy files from the companion disks that are
shipped with the reader.
5. Make sure your current directory is the one where you installed the Auto-
Loader batch files, or make sure that directory is listed in the path
statement of your host computer’s AUTOEXEC.BAT file.
6. Type this command:
loadadd [path\]filename [path\filename path\filename...]
where:
path is the drive and directory of the file or files to include in the
image file and load to the reader. If you do not include a path,
the current directory is used.
filename is the name of the file or files to include in the image file and
load to the reader.
You can include multiple path\filename and path\*.* parameters in the
command. The path\*.* parameter loads all the files in a directory.
For example:
loadadd c:\janus\config.sys c:\atadrv\*.* c:\data\*.*
7. Auto-Loader runs Intersvr on the host computer. When you see the
Interlnk Server Status screen on the host computer, press to
warm boot the reader and load Interlnk into memory. Auto-Loader begins
updating drive C.
8. When the update is complete, the reader reboots automatically. Exit
Intersvr on the host computer by pressing Alt-F4. This message appears:
Drive C: Installation process completed.
9. Interlnk is still loaded in the reader’s memory. If you need the conventional
memory to run other applications, press to warm boot the
reader. Because Intersvr is no longer running on the host computer, a warm
boot does not cause Interlnk to load itself into the reader’s memory.
Auto-Loader saves all the files contained in the image file to the
NEWDRV_C\C_FINAL directory and saves the image file in the
NEWDRV_C\IMAGE directory. Auto-Loader overwrites these directories each
time you use a LOAD or MAKE command, with the exception that
LOADIMG.BAT and LOADXIMG.BAT preserves the image file for successive
use.
3-17