Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Conditioning Fibreboards<br />
Pan 462 Pan 376<br />
Before final fixing fibreboards should be conditioned (bring their moisture content into equilibrium with their surroundings) this<br />
helps to prevent subsequent movement problems.<br />
Board conditioning by exposure to air conditioning with water<br />
standard hardboard 3 to 5 days. Ideally 48 to 72 hours, min 23 hours.<br />
Tempered hardboard 5 to 7 days. As above.<br />
medium Density Fibreboard (mDF) Only required if boards have become<br />
very dry, 3 days.<br />
Not recommended.<br />
insulating Boards Remove all packaging, 1 to 2 days. Not recommended.<br />
Flame Retardant Board FR Boards contain water-soluble salts<br />
so only condition in air.<br />
To condition with water, lay the boards down under cover. With a brush, rub clean water into the back face of the board at the<br />
rate of half to one litre for a board 2440 x 1220 x 3.6mm. Work from the centre outwards then place them wet side to wet<br />
side in a neat stack. The boards should then be allowed to stand for the appropriate minimum length of time given above.<br />
SMALLPRINT:<br />
Not recommended.<br />
Quality – Every effort is made to ensure the consistency of our products, subject to natural variations in grain and<br />
colour. Natural products do not always match the expectations of the user. Please ensure that all products are<br />
inspected prior to processing to establish the visual suitability for the intended use. Claims can only be considered<br />
if materials are returned in the same condition as received.<br />
Storage – All products should be stored flat on pallets in a dry area before use. Ideally timber and wood based<br />
products should have a moisture content when installed, close to the moisture content they will attain in service.<br />
Sizes – All sizes are nominal unless otherwise stated and are subject to normal trade tolerances.<br />
Prices – All prices exclude VAT and act only as a guide for the product price. All prices are correct at time of going<br />
to print and are subject to amendment without notice.<br />
Stock – Not all products are stocked at all branches.<br />
Delivery – We are able to deliver to businesses across the whole of the UK. The minimum order for delivery is<br />
£250, the company reserves the right to apply a delivery charge dependent on geographical location.<br />
Terms – All transactions are subject to our standard terms and conditions of sale.<br />
49<br />
Conditioning Fibreboards