Mini 3 18 to 39kW - CMS
Mini 3 18 to 39kW - CMS
Mini 3 18 to 39kW - CMS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
The Hoval <strong>Mini</strong>-3H boiler / calorifier combination is a compact<br />
solution for your heating and hot water requirements.<br />
Dry back type flue box<br />
permits lower operating<br />
temperatures<br />
3rd pass through the<br />
Thermolytic heat<br />
exchanger with regula<strong>to</strong>rs<br />
2nd pass through baffle<br />
plate<br />
1st pass in<strong>to</strong> combustion<br />
chamber<br />
Enamelled calorifier shell<br />
Calorifier primary coil<br />
<strong>Mini</strong>-3H combination boiler<br />
The <strong>Mini</strong>-3 can be supplied as a combination boiler with an integral temperature controlled calorifier.<br />
This is available as either a 150, 200, or 300 litre unit.<br />
The enamel lined steel calorifiers are fitted with a built-in primary heating coil, providing rapid recovery of DHW, and insulated with<br />
50mm polyurethane plastic foam within a steel Hoval red casing.<br />
Optional electric immersion heater<br />
A 3kW electrical immersion heater is available as an optional extra.<br />
Where required TopTronic<br />
controllers can be fitted.<br />
Burner acoustic cover<br />
Double hinge door with<br />
swivel arrangement for<br />
ease of servicing, even<br />
with low NOx burners with<br />
longer blast tubes.<br />
Burners suitable for natural<br />
gas, oil and LPG firing.<br />
Magnesium sacrificial anode<br />
Calorifier immersion sensor<br />
Calorifier insulation<br />
Note: This version is offered in the UK as<br />
a special. The standard combination unit<br />
has the calorifier on <strong>to</strong>p of boiler. Please<br />
see dimensional details.<br />
Mg anode protection<br />
The DHW side of the calorifier is protected from corrosion by a Magnesium (Mg) sacrificial anode which is supplied on all combination<br />
units.