About Your Monitor - TigerDirect.com
About Your Monitor - TigerDirect.com About Your Monitor - TigerDirect.com
Documentation http://support.dell.com/support/edocs/systems/1707FP/en/about.htm 1 VESA mounting holes (100mm) (Behind attached base plate) Use to mount the monitor. 2 Barcode serial number label Refer to this label if you need to contact Dell for technical support. 3 Security lock slot Use a security lock with the slot to help secure your monitor. 4 Dell Soundbar mounting brackets Attach the optional Dell Soundbar. 5 Regulatory rating label List the regulatory approvals. 6 Stand removal button Press to release the stand 7 Cable holder Help organize cables by placing them in the holder. 8 Lock down/release button Push the monitor down, press the button to unlock the monitor, and then lift the monitor to the desired height. Bottom View 1 Power connector Insert the power cable. 2 Dell Soundbar power connector Connect the power cord for the Soundbar (optional). 3 DVI connector Connect your computer DVI cable. 4 VGA connector Connect your computer VGA cable. 5 USB upstream connector Connect the USB cable that came with your monitor to the monitor and the computer. Once this cable is connected you can use the USB connectors on the side and bottom of the monitor. 6 USB connector Connect your USB devices. NOTE: You can use this connector only after you connect the USB cable to the computer and the USB upstream connector on the monitor. Side View 2 of 7 12/31/2009 2:22 PM
Documentation http://support.dell.com/support/edocs/systems/1707FP/en/about.htm Monitor Specifications Power Management Modes USB connectors (downstream) Left side Right side If you have VESA's DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as 'Power Save Mode'*. If input from keyboard, mouse, or other input devices is detected by the computer, the monitor automatically 'wakes up'. The following table shows the power consumption and signaling of this automatic power saving feature: VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption Normal operation (with Dell Soundbar and USB active) Active Active Active Green 75 W (maximum) Normal operation Active Active Active Green 32 W (typical) Active-off mode Inactive Inactive Blanked Amber Less than 2 W Switch off - - - Off Less than 1 W NOTE: The OSD will only function in the 'normal operation' mode. One of the following messages will appear when the “menu” or “plus” buttons are pressed when in Active-off mode. 1. Analog Input In Power Save Mode Press Computer Power Button or Any Key on Keyboard or Move Mouse or 2. Digital Input In Power Save Mode Press Computer Power Button or Any Key on Keyboard or Move Mouse Activate the computer and 'wake up' the monitor to gain access to the OSD. This monitor is ENERGY STAR®-compliant as well as TCO '99 / TCO '03 power management compatible. * Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor. Pin Assignments 15-pin D-Sub connector Pin Number Monitor Side of the 15-pin Side Signal Cable 1 Video-Red 2 Video-Green 3 of 7 12/31/2009 2:22 PM
- Page 1: Documentation http://support.dell.c
- Page 5 and 6: Documentation http://support.dell.c
- Page 7: Documentation http://support.dell.c
Documentation http://support.dell.<strong>com</strong>/support/edocs/systems/1707FP/en/about.htm<br />
<strong>Monitor</strong> Specifications<br />
Power Management Modes<br />
USB connectors (downstream)<br />
Left side Right side<br />
If you have VESA's DPM <strong>com</strong>pliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred<br />
to as 'Power Save Mode'*. If input from keyboard, mouse, or other input devices is detected by the <strong>com</strong>puter, the monitor automatically 'wakes up'. The following table shows<br />
the power consumption and signaling of this automatic power saving feature:<br />
VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption<br />
Normal operation (with Dell Soundbar and USB active) Active Active Active Green 75 W (maximum)<br />
Normal operation Active Active Active Green 32 W (typical)<br />
Active-off mode Inactive Inactive Blanked Amber Less than 2 W<br />
Switch off - - - Off Less than 1 W<br />
NOTE: The OSD will only function in the 'normal operation' mode. One of the following messages will appear when the “menu” or “plus” buttons are<br />
pressed when in Active-off mode.<br />
1. Analog Input<br />
In Power Save Mode<br />
Press Computer Power Button<br />
or Any Key on Keyboard or Move Mouse<br />
or<br />
2. Digital Input<br />
In Power Save Mode<br />
Press Computer Power Button<br />
or Any Key on Keyboard or Move Mouse<br />
Activate the <strong>com</strong>puter and 'wake up' the monitor to gain access to the OSD.<br />
This monitor is ENERGY STAR®-<strong>com</strong>pliant as well as TCO '99 / TCO '03 power management <strong>com</strong>patible.<br />
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.<br />
Pin Assignments<br />
15-pin D-Sub connector<br />
Pin Number <strong>Monitor</strong> Side of the 15-pin Side Signal Cable<br />
1 Video-Red<br />
2 Video-Green<br />
3 of 7 12/31/2009 2:22 PM
Change language