K9agm2 - TigerDirect.com
K9agm2 - TigerDirect.com K9agm2 - TigerDirect.com
3-16 MS-7327 Mainboard Re-Call VGA BIOS from S3 Selecting [Enabled] allows BIOS to call VGA BIOS to initialize the VGA card when system wakes up (resumes) from S3 sleep state. The system resume time is shortened when you disable the function, but system will need an AGP driver to initialize the VGA card. Therefore, if the AGP driver of the card does not support the initialization feature, the display may work abnormally or not function after resuming from S3. Suspend Time Out (Minute) If system activity is not detected for the length of time specified in this field, all devices except CPU will be shut off. Power Button Function This feature sets the function of the power button. Settings are: [Power On/ Off] The power button functions as normal power off button. [Suspend] When you press the power button, the computer enters the suspend/sleep mode, but if the button is pressed for more than four seconds, the computer is turned off. Restore On AC Power Loss This item specifies whether your system will reboot after a power failure or interrupt occurs. Settings are: [Off] Always leaves the computer in the power off state. [On] Always leaves the computer in the power on state. [Last State] Restores the system to the status before power failure or interrupt occurred. Wakeup Event Setup Press to enter the sub-menu: Resume From S3 By USB Device The item allows the activity of the USB device to wake up the system from S3 (Suspend to RAM) sleep state. Resume From S3 By PS/2 Keyboard This controls how the PS/2 keyboard is able to power on the system. If you choose Specific Key, the power button on the case will not function anymore and you must type the password to power on the system. Specific Key PowerOn If Resume From S3 By PS/2 Keyboard is set to [Specific Key], then you can set the specific key in the field for the PS/2 keyboard to power on the system. Resume from S3 By PS/2 Mouse This setting determines whether the system will be awakened from what power saving modes when input signal of the PS/2 mouse is detected. Resume by PCI Device (PME#) When set to [Enabled], the feature allows your system to be awakened from the
BIOS Setup power saving modes through any event on PME (Power Management Event). Resume by PCIE Device When set to [Enabled], the feature allows your system to be awakened from the power saving modes through any event on PCIE device. Resume by RTC Alarm The field is used to enable or disable the feature of booting up the system on a scheduled time/date. 3-17
- Page 1 and 2: i K9AGM2 MS-7327 (v1.X) Mainboard G
- Page 3 and 4: Safety Instructions 1. Always read
- Page 5: WEEE (Waste Electrical and Electron
- Page 8 and 9: CONTENTS Copyright Notice .........
- Page 10 and 11: Chapter 1 Getting Started Getting S
- Page 12 and 13: Floppy Getting Started - 1 floppy p
- Page 14 and 15: Packing Checklist MSI motherboard P
- Page 16 and 17: Chapter 2 Hardware Setup Hardware S
- Page 18 and 19: CPU (Central Processing Unit) Hardw
- Page 20 and 21: Hardware Setup Installing AMD Socke
- Page 22 and 23: Hardware Setup Installing DDRII Mod
- Page 24 and 25: Back Panel Mouse Parallel Port Keyb
- Page 26 and 27: Connectors Hardware Setup Floppy Di
- Page 28 and 29: Hardware Setup Fan Power Connectors
- Page 30 and 31: Hardware Setup Front USB Connectors
- Page 32 and 33: Hardware Setup IEEE 1394 Connector:
- Page 34 and 35: Jumpers Hardware Setup Clear CMOS J
- Page 36 and 37: Hardware Setup PCI (Peripheral Comp
- Page 38 and 39: 3-2 MS-7327 Mainboard Entering Setu
- Page 40 and 41: 3-4 MS-7327 Mainboard The Main Menu
- Page 42 and 43: 3-6 MS-7327 Mainboard Standard CMOS
- Page 44 and 45: 3-8 MS-7327 Mainboard System Inform
- Page 46 and 47: 3-10 MS-7327 Mainboard MPS Table Ve
- Page 48 and 49: 3-12 MS-7327 Mainboard Surround Vie
- Page 50 and 51: 3-14 MS-7327 Mainboard OnChip SATA
- Page 54 and 55: 3-18 MS-7327 Mainboard PNP/PCI Conf
- Page 56 and 57: 3-20 MS-7327 Mainboard H/W Monitor
- Page 58 and 59: 3-22 MS-7327 Mainboard Load Optimiz
- Page 60 and 61: A-2 MS-7327 Mainboard Installing th
- Page 62 and 63: A-4 MS-7327 Mainboard Software Conf
- Page 64 and 65: A-6 MS-7327 Mainboard Equalizer Sel
- Page 66 and 67: A-8 MS-7327 Mainboard Mixer In the
- Page 68 and 69: A-10 MS-7327 Mainboard 3. Playback
- Page 70 and 71: Audio I/O A-12 MS-7327 Mainboard In
- Page 72 and 73: A-14 MS-7327 Mainboard S/PDIF Short
- Page 74 and 75: A-16 MS-7327 Mainboard Microphone I
- Page 76 and 77: A-18 MS-7327 Mainboard Information
- Page 78 and 79: A-20 MS-7327 Mainboard n 4-Channel
- Page 80 and 81: A-22 MS-7327 Mainboard n 8-Channel
- Page 82 and 83: B-2 MS-7280 Mainboard RAID Configur
- Page 84 and 85: B-4 MS-7280 Mainboard Define LD (Cr
- Page 86 and 87: B-6 MS-7280 Mainboard Press ESC key
- Page 88 and 89: B-8 MS-7280 Mainboard Installing th
BIOS Setup<br />
power saving modes through any event on PME (Power Management Event).<br />
Resume by PCIE Device<br />
When set to [Enabled], the feature allows your system to be awakened from the<br />
power saving modes through any event on PCIE device.<br />
Resume by RTC Alarm<br />
The field is used to enable or disable the feature of booting up the system on a<br />
scheduled time/date.<br />
3-17
Change language