K9agm2 - TigerDirect.com
K9agm2 - TigerDirect.com K9agm2 - TigerDirect.com
3-12 MS-7327 Mainboard Surround View SurroundView Technology that allows you to add an ATI external graphics card to enable three separate displays. Display Device Select This item allows you to select the display device. TV NTSC/PAL Display Select This item allows you to select NTSC or PAL signal.
Integrated Peripherals BIOS Setup USB Controller This setting allows you to enable/disable the onboard USB 1.1/ 2.0 controller. USB Device Legacy Support Select [Enabled] if you need to use a USB-interfaced device in the operating system. Onboard LAN Controller This setting allows you to enable/disable the onboard LAN controller. LAN Option ROM This item is used to decide whether to invoke the Boot ROM of the onboard LAN. Onboard IEEE1394 Controller This item allows you to enable/disable the onboard IEEE1394 controller. Onboard Audio Controller This setting is used to enable/disable the onboard audio controller. IDE Devices Configuration Press to enter the sub-menu: PCI IDE BusMaster This item allows you to enable/ disable BIOS to used PCI busmastering for reading/ writing to IDE drives. OnChip SATA Channel This item allows users to enable or disable the SATA controller. 3-13
- Page 1 and 2: i K9AGM2 MS-7327 (v1.X) Mainboard G
- Page 3 and 4: Safety Instructions 1. Always read
- Page 5: WEEE (Waste Electrical and Electron
- Page 8 and 9: CONTENTS Copyright Notice .........
- Page 10 and 11: Chapter 1 Getting Started Getting S
- Page 12 and 13: Floppy Getting Started - 1 floppy p
- Page 14 and 15: Packing Checklist MSI motherboard P
- Page 16 and 17: Chapter 2 Hardware Setup Hardware S
- Page 18 and 19: CPU (Central Processing Unit) Hardw
- Page 20 and 21: Hardware Setup Installing AMD Socke
- Page 22 and 23: Hardware Setup Installing DDRII Mod
- Page 24 and 25: Back Panel Mouse Parallel Port Keyb
- Page 26 and 27: Connectors Hardware Setup Floppy Di
- Page 28 and 29: Hardware Setup Fan Power Connectors
- Page 30 and 31: Hardware Setup Front USB Connectors
- Page 32 and 33: Hardware Setup IEEE 1394 Connector:
- Page 34 and 35: Jumpers Hardware Setup Clear CMOS J
- Page 36 and 37: Hardware Setup PCI (Peripheral Comp
- Page 38 and 39: 3-2 MS-7327 Mainboard Entering Setu
- Page 40 and 41: 3-4 MS-7327 Mainboard The Main Menu
- Page 42 and 43: 3-6 MS-7327 Mainboard Standard CMOS
- Page 44 and 45: 3-8 MS-7327 Mainboard System Inform
- Page 46 and 47: 3-10 MS-7327 Mainboard MPS Table Ve
- Page 50 and 51: 3-14 MS-7327 Mainboard OnChip SATA
- Page 52 and 53: 3-16 MS-7327 Mainboard Re-Call VGA
- Page 54 and 55: 3-18 MS-7327 Mainboard PNP/PCI Conf
- Page 56 and 57: 3-20 MS-7327 Mainboard H/W Monitor
- Page 58 and 59: 3-22 MS-7327 Mainboard Load Optimiz
- Page 60 and 61: A-2 MS-7327 Mainboard Installing th
- Page 62 and 63: A-4 MS-7327 Mainboard Software Conf
- Page 64 and 65: A-6 MS-7327 Mainboard Equalizer Sel
- Page 66 and 67: A-8 MS-7327 Mainboard Mixer In the
- Page 68 and 69: A-10 MS-7327 Mainboard 3. Playback
- Page 70 and 71: Audio I/O A-12 MS-7327 Mainboard In
- Page 72 and 73: A-14 MS-7327 Mainboard S/PDIF Short
- Page 74 and 75: A-16 MS-7327 Mainboard Microphone I
- Page 76 and 77: A-18 MS-7327 Mainboard Information
- Page 78 and 79: A-20 MS-7327 Mainboard n 4-Channel
- Page 80 and 81: A-22 MS-7327 Mainboard n 8-Channel
- Page 82 and 83: B-2 MS-7280 Mainboard RAID Configur
- Page 84 and 85: B-4 MS-7280 Mainboard Define LD (Cr
- Page 86 and 87: B-6 MS-7280 Mainboard Press ESC key
- Page 88 and 89: B-8 MS-7280 Mainboard Installing th
Integrated Peripherals<br />
BIOS Setup<br />
USB Controller<br />
This setting allows you to enable/disable the onboard USB 1.1/ 2.0 controller.<br />
USB Device Legacy Support<br />
Select [Enabled] if you need to use a USB-interfaced device in the operating system.<br />
Onboard LAN Controller<br />
This setting allows you to enable/disable the onboard LAN controller.<br />
LAN Option ROM<br />
This item is used to decide whether to invoke the Boot ROM of the onboard LAN.<br />
Onboard IEEE1394 Controller<br />
This item allows you to enable/disable the onboard IEEE1394 controller.<br />
Onboard Audio Controller<br />
This setting is used to enable/disable the onboard audio controller.<br />
IDE Devices Configuration<br />
Press to enter the sub-menu:<br />
PCI IDE BusMaster<br />
This item allows you to enable/ disable BIOS to used PCI busmastering for<br />
reading/ writing to IDE drives.<br />
OnChip SATA Channel<br />
This item allows users to enable or disable the SATA controller.<br />
3-13