You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Advanced BIOS Features<br />
BIOS Setup<br />
Full Screen LOGO Display<br />
This item enables you to show the <strong>com</strong>pany logo on the bootup screen. Settings are:<br />
[Enabled] Shows a still image (logo) on the full screen at boot.<br />
[Disabled] Shows the POST messages at boot.<br />
Quick Booting<br />
Setting the item to [Enabled] allows the system to boot within 5 seconds since it will<br />
skip some check items.<br />
Boot Up Num-Lock LED<br />
This setting is to set the Num Lock status when the system is powered on. Setting to<br />
[On] will turn on the Num Lock key when the system is powered on. Setting to [Off]<br />
will allow users to use the arrow keys on the numeric keypad.<br />
Boot To OS/2<br />
This allows you to run the OS/2 ® operating system with DRAM larger than 64MB.<br />
When you choose [No], you cannot run the OS/2 ® operating system with DRAM<br />
larger than 64MB. But it is possible if you choose [Yes].<br />
IOAPIC Function<br />
This field is used to enable or disable the APIC (Advanced Programmable Interrupt<br />
Controller). Due to <strong>com</strong>pliance with PC2001 design guide, the system is able to run in<br />
APIC mode. Enabling APIC mode will expand available IRQ resources for the system.<br />
3-9