CHARACTERIZATION OF A BIOMASS MILLING PILOT ... - circe

6 REFERENCES
[1] S. Van Loo, J. Koppejan. The handbook of
Biomass Combustion and Co-firing. Earthscan
(2008).
[2] L. Ortiz, A. Tejada, A. Vazquez.
Aprovechamiento de la biomasa forestal
producida por la cadena monte-industria. CIS-
Madera, Universidad de Pontevedra
[3] L.J. Naimi, S. Sokhansanj, S. Mani, M. Hoque, T.
Bi, A.R.Womac, S, Narayan. Cost and
Performance of Woody Biomass Size Reduction
for Energy Production. CSBE/SCGAB Annual
Conference Paper No: 06-107, Alberta, July 2006.
[4] S.P. Venkata, A.R. Womac, N. Chevanan, S.
Sokhansanj. Comminution Porperties of Biomass
in Hammer Mill and its Particle Size
Characterization. ASABE Annual Meeting,
ASABE Paper No: 083785, Rhode Island, July
2008.
[5] L. Cadoche, G.D. López. Assessment of Size
Reduction as a Preliminary Step in the Production
of Ethanol from Lignocellulosic Waste.
Biological Wastes (1989), vol. 30, pp. 153-157.
[6] D.J. Schell, C. Harwood. Milling of
Lignocellulosic Biomass. Applied Biochemistry
and Biotechnology, vol. 45/46 (1994), pp. 159-
168.
[7] H. Spliethoff, K.R.G. Hein. Effect of Cocombustion
of Biomass on Emissions in
Pulverized Fuel Furnaces. Fuel Processing
Technology, vol. 54 (1998), pp. 189-205.
[8] M. Gil, A. Gonzalez, A. Gil. Evaluation of
Milling Energy Requirements of Biomass
Residues in a Semi-industrial Pilot Plant for Cofiring.
Proceedings 16th European Biomass
Conference and Exhibition, Valencia, 2008.
[9] S. Mani, L.G. Tabil, S. Sokhansanj. Grinding
Performance and Physical Properties of Wheat
and Barley Straws, Corn Stover and Switchgrass.
Biomass and Bioenergy, vol. 27 (2004), pp. 339-
352.
[10] L.S. Esteban, J.E. Carrasco. Evaluation of
Different Strategies for Pulverization of Forest
Biomasses- Powder Technology, vol. 166 (2006),
pp. 139-151.
[11] P.I. Miu, A.R. Womac, C. Igathinathane, S.
Sokhansanj. Analysis of Biomass Comminution
and Separation Process in Rotary Equipment. A
Review. ASABE Annual International Meeting,
ASABE Paper No: 066169, Oregon, July 2006.
[12] A.R. Womac, C. Igathinathane, P. Biltra, P.Miu,
T. Yang, S. Sokhansanj, S. Narayan. Biomass
Pre-Processing Size Reduction with Instrumented
Mills. ASABE Annual International Meeting,
ASABE Paper No: 076046, Minnesota, June
2007.
[13] M. Hoque, S. Sokhansanj, L. Naimi, X. Lim, A.R.
Womac. Review and analysis of performance and
productivity of Size Reduction Equipment for
Fibrous Materials. ASABE Annual International
Meeting, ASABE Paper No: 076164, Minnesota,
June 2007.
[14] L.G. Austin. A Treatment of Impact Breakage of
Particle. Powder Technology», vol. 126 (2002),
pp. 85-90.
[15] Standard Test Method for total moisture in Coal D
3302-82. ASME, American Society for
Mechanical Engineers.
[16] T. Allen. Powder sampling and particle size
measurement. Chapman & Hall (1997)
[17] A. Diez-Lazaro, M. L. Hitchman, D. Littlejohn.
Considerations for the selection and design os
sampling systems for heterogeneous process in a
stirred tank reactor. Chemical Engineering
Research and Design, vol 83, pp 344-351.
Glasgow, 2005.
[18] D.R. Kaushal, Y. Tomita. Solids Concentration
Profiles and Pressure Drop in Pipeline Flow of
Multisized Particulated Slurries. International
Journal of Multiphase Flow, vol 28, pp. 1697-
1717. Japan, 2002.
[19] S.L. Soo, C. Zhu. Instrumentation Flow Fluid-
Particle Flow. University of Illinois ar Urbana-
Champaign. Noyes Publications and William
Andrew Publishing. USA.
[20] Stationary source emissions. Measurement of
velocity and volume flowrate of gas streams in
ducts. International Standard ISO 10780
[21] T.G.Bridgeman et al. Influence of Particle Size
on the Analytical and Chemical Properties of Two
Energy Crops. Fuel, vol. 86, pp. 60-72. 2007.