Engineering Application of Exergy Analysis - circe - Universidad de ...

φ non-dimensional irreversibility
Subscripts and superscripts
ch chemical
i flow
j substance in a flow
k component
ph physical
0 reference conditions
References
[1] European Commission, Join Research Centre,
Institute for Prospective and Technological
Studies, 2001, Best Available Techniques
Reference Document on Energy Efficiency.
http://eippcb.jrc.es/reference/i&s.html
[2] Szargut, J., 2005, Exergy Method. Technical
and Ecological Applications, WIT Press,
Southampton, UK.
[3] Kotas, T.J., 1985, The exergy method of
thermal plant analysis, Butterworths, London.
[4] Costa, M. M. et. al., 2001, Exergy accounting
of energy and materials flows in steel
production systems, Energy, 26 (4), pp. 363-
384.
[5] Bisio, G., 1993, Exergy method for efficient
energy resource use in the steel industry,
Energy, 18 (9), pp. 971-985.
[6] Çamdali, Ü., Tunç, M., 2003, Exergy analysis
and efficiency in an industrial AC electric
ARC furnace, Applied Thermal Engineering,
23(17), pp.2255-2267.
[7] Bisio, G., 1998, A second-law analysis of the
“hot blast stove/gas turbine” combination by
applying the parameter “usable exergy”,
Energy Conversion and Management, 39(3-4),
pp. 217-227.
[8] Maruoka, N., Akiyama, T., 2006, Exergy
recovery from steelmaking off-gas by latent
heat storage for methanol production, Energy,
31(10-11), pp. 1632-1642.
[9] Michaelis, P., Jackson, T., Clift R., 1998,
Exergy analysis of the life cycle of steel,
Energy, 23(3), pp. 213-220.
[10] Nippon Steel Corporation, 2004, OG
Specifications. Project ENSIDESA.
http://www.ecos2010.ch 8 14-17th june 2010, Lausanne, Switzerland