Nurses Training Guide - UCSF Radiation Oncology

Lesson 2: Scheduling
Copyright 2007, IMPAC Medical Systems 89
LTGMSQ0001/1.0/19-Jun-2007
Notes The Resource Configuration tab contains four resource fields from which you select a type
of resource. When you select a resource type, a field displays below the Resource field in
which you can select a specific resource of that type.
9. Click next to the Staff field, then select Jed Clampet.
Indicates Jed Clampet as the first resource to display on the Department
Daysheet.
10. Click next to the Resource 2 field, then select Location.
Indicates the second resource as a location, then displays the Location field.
11. Click next to the Location field, then select Exam Room 1.
Indicates Exam Room 1 as the second resource to display on the Department
Daysheet.
12. Click next to the Resource 3 field, then select CPT Group.
Indicates the third resource as a CPT group, then displays the CPT Group field.
13. Click next to the CPT Group field, then select Consultations.
Indicates the third resource as consultations to display on the Department
Daysheet.
You can specify any combination of resource types. For
example, you could have four staff members, or two staff
members and two locations. You can also leave resource
types blank.
The Resource Configuration tab should look similar to the one shown in Figure
70.
Figure 70: Resource Configuration Tab – Resources Selected