Nurses Training Guide - UCSF Radiation Oncology

Lesson 1: The Basics
Copyright 2007, IMPAC Medical Systems 53
LTGMSQ0001/1.0/19-Jun-2007
Notes
The Quick Version
Opening and Closing the Patient Chart
1. Log on to MOSAIQ.
2. Click File | Open Patient Chart….
3. Double-click a patient name, click to display the patient chart.
4. Click to close the patient chart.
Displaying the eChart Menu
1. Click File | Open Patient Chart….
2. In the Select Patient window, double-click a patient or quick admit a new one.
3. Click eChart.
Displaying the eChart Navigator
1. Click on the Tool Bar.
Configuring Navigator Notes
1. Right-click anywhere in the Clinical Notes tab section.
2. Click Configuration….
3. Enter the label names in the Tab 1-5 fields, then click .
4. Click .
INI Configuration for eChart Navigator Default View
1. Click and select Run.
2. Type the following in the Open field:
impac.ini
3. Click .
4. Within the [Global] section, locate the Navigator = entry.
5. To retain the default view, leave this field blank.
6. Save the file and close Notepad.