English - Spallation Neutron Source
English - Spallation Neutron Source
English - Spallation Neutron Source
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Interval Timer Operation<br />
Chapter 5: Using The Cabinet<br />
1. When selected, the Interval Timer menu is displayed on the LCD.<br />
The timer defaults to 0:00:00 (hours:minutes:seconds).<br />
2. Press and hold the “▲” or “▼” buttons to increase or decrease the<br />
timer interval.<br />
3. When the proper interval is entered on the display, press the “OK”<br />
button to start the timer.<br />
4. When the timer reaches 0:00:00, an audible alarm will sound, and the<br />
timer will reset itself and repeat the countdown .<br />
5. Press the “OK” button to pause the timer.<br />
6. Press the “Menu” button to clear the interval timer and return to the<br />
main timer menu.<br />
Stopwatch Timer Operation<br />
1. When selected, the Stopwatch Timer menu is displayed on the LCD.<br />
The timer defaults to 0:00:00.<br />
2. Press the “OK” button to start the timer.<br />
3. Press the “OK” button again to zero the timer.<br />
4. Press the “Menu” button to clear the stopwatch timer and return to the<br />
main timer menu.<br />
Menu Options<br />
UV Lamp Operation<br />
This menu option allows you to select whether the UV light will turn on<br />
automatically every time the sash is completely closed.<br />
Smart-Start<br />
When the “Smart-Start” option is selected, the UV light will turn on<br />
every time the sash is closed.<br />
Manual<br />
When the “manual touchpad” option is selected, the UV light must be<br />
turned on and off at the touchpad.<br />
Product Service 1-800-522-7658 33