English - Spallation Neutron Source
English - Spallation Neutron Source
English - Spallation Neutron Source
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 3: Getting Started<br />
2. Select the height of the stand and slide four (4) leg extensions into base<br />
stand corner posts and attach with 2 ¼ inch long bolt, flatwasher,<br />
lockwasher and nut. Ensure that the same height hole is selected for each<br />
leg. Tighten the leg bolts securely. See Figure 3-1.<br />
Figure 3-1<br />
3. CAUTION: Only lift and support the weight of the cabinet at the<br />
stainless steel sides and back. Damage will occur if lifted or supported on<br />
the front edge. Move the base stand into its final location. Using a<br />
carpenter’s level, adjust each leveling foot until the stand is level in both<br />
planes as shown in Figure 3-2. You are now ready to lift the Biosafety<br />
Cabinet onto its stand.<br />
Figure 3-2<br />
Product Service 1-800-522-7658 9