Precious Metals Recovery LLC RCRA Permit Application Dry Hills ...

18.0 TOPOGRAPHICAL MAP – 40 CFR 270.14(b)(19)
Drawings and figures have been created that present all items required in 40 CFR 270.14(b)(19).
All maps display an orientation arrow (North arrow), map scale, and date. Drawing H340940-
0000-07-015-0001 is a topographic map with a scale of one inch equal to two hundred feet (1” =
200’) of the facility footprint and presents a 1,000-foot perimeter, the Crescent Valley wind rose
(Figure 11.5-1 in Appendix 11-A), and the locations of the operational units within the proposed
TSF Building; Figure 11.12-1 in Appendix 11-A is the most current FIRM panel for the Crescent
Valley; Figure 11.12-1 in Appendix 11-A depicts the legal boundaries of the proposed TSF,
access control points, buildings and structures, and barriers for drainage. Figure 11.3-1 in
Appendix 11-A shows the surface waters, surrounding land uses, injections wells, and barriers
used for flood control.
No injection wells are shown on Figure 11.3-1 in Appendix 11-A, because there are no injection
wells in Section 5 of Range 50 East, Township 29 North, or the eight surrounding sections of
land. Likewise, no specific measures have been taken to engineer flood barriers, because the site
will be not located within a 100-year flood plain.
PMR RCRA Permit Application, Dry Hills Facility Page 99
JBR Environmental Consultants, Inc. | HATCH March 2013