TDP-459 Users Guide - MItsubishi Imaging

.
< Cleaning the thermal head>
4. Wipe the heating element (thin glassy
band) of the thermal head with a
recommended cleaning cloth soaked in
the adequate amount of recommended
cleaning fluid, applying it overall and
uniformly, and moving it from side to side.
< Cleaning the head-position plate>
5. Wipe the head-position plate with a
recommended cleaning cloth soaked in
the adequate amount of recommended
cleaning fluid, applying it overall and
uniformly, and moving it from side to side.
.
The thermal head is hot just after
printing. Do not touch it directly by
hand.
Fingerprints on the thermal head
heating element can cause the
thermal head to fail. Do not touch it
directly by hand.
Be careful not to be injured by
protrusions in the Thermal Digiplater.
< Cleaning the cleaning rollers>
6. Wipe the cleaning rollers with a
recommended cleaning cloth soaked in
the adequate amount of recommended
cleaning fluid.
Cleaning rollers
- 39 -
Chapter 4 Daily Maintenance
Thermal head
Head-position plate
[Useful tip]
Cleaning rollers are provided on the entrance and discharge sides.
TDP-459