TDP-459 Users Guide - MItsubishi Imaging
TDP-459 Users Guide - MItsubishi Imaging
TDP-459 Users Guide - MItsubishi Imaging
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3.3.8 Setup of Plate Remains SW (on/off)<br />
<br />
1. In the ready state, press the menu button<br />
once, press the + button 7 times, and<br />
display ”Remains Sw” on the LCD.<br />
- 37 -<br />
Chapter 3 Use of Operation Panel<br />
[Useful tip]<br />
Pressing the + or - button repeatedly changes the message on the LCD as<br />
shown below.<br />
2. Press the enter button, and display the<br />
setting state (on/off) of “Remains SW” .<br />
<br />
<br />
3. Press the + or - button to change the state<br />
(on/off) of “Remains SW”.<br />
4. Press the enter button to select the operation<br />
for setting “Remains SW”.<br />
5. Press the clear button repeatedly until the<br />
ready state is displayed.<br />
Remains Sw<br />
Remains off<br />
Remains on<br />
Remains on<br />
<strong>TDP</strong>-<strong>459</strong>