TDP-459 Users Guide - MItsubishi Imaging
TDP-459 Users Guide - MItsubishi Imaging
TDP-459 Users Guide - MItsubishi Imaging
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 3 Use of Operation Panel<br />
3.3.3 Adjusting the print density<br />
1. In the ready state, press the menu button<br />
once, press the + button 2 times, and<br />
display “Density” on the LCD.<br />
<strong>TDP</strong>-<strong>459</strong><br />
[Useful tip]<br />
Pressing the + or - button repeatedly changes the message on the LCD as<br />
shown below.<br />
2. Press the enter button to select the<br />
operation for adjusting the print density.<br />
3. Change the print density by pressing the +<br />
or - button.<br />
[Useful tip]<br />
The density can be adjusted within 20%, in increments of 1%.<br />
4. Press the enter button to confirm the<br />
changed density.<br />
5. Press the clear button repeatedly until the<br />
ready state is displayed.<br />
- 30 -<br />
Density<br />
Density ***%<br />
Density 101%<br />
Density 101%