TDP-459 Users Guide - MItsubishi Imaging
TDP-459 Users Guide - MItsubishi Imaging
TDP-459 Users Guide - MItsubishi Imaging
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 3 Use of Operation Panel<br />
3.3.2 Setting a customized plate size<br />
1. In the ready state, press the menu button<br />
once, press the + button once, and display<br />
“Custom Size Set” on the LCD.<br />
<strong>TDP</strong>-<strong>459</strong><br />
[Useful tip]<br />
Pressing the + or - button repeatedly changes the message on the LCD as<br />
shown below.<br />
2. Press the enter button to select the<br />
operation for setting a customized plate<br />
size.<br />
3. Press the + or - button to display a<br />
different customized plate size.<br />
4. Press the enter button to select the<br />
desired plate size.<br />
- 28 -<br />
Custom Size Set<br />
CSize01: *** x ***<br />
CSize05: *** x ***<br />
CSize05: *** x ***
Change language