TDP-459 Users Guide - MItsubishi Imaging
TDP-459 Users Guide - MItsubishi Imaging
TDP-459 Users Guide - MItsubishi Imaging
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
13. Slowly close the plate cover.<br />
Be careful not to catch fingers when<br />
closing the plate cover.<br />
14. Press the loading button on the<br />
operation panel.<br />
- 21 -<br />
Chapter 2 Installation and Setup<br />
[Useful tip]<br />
If the size of the plate placed in this machine does not match the plate size set,<br />
the loading will not be completed correctly. If an error occurs, check the size of<br />
the actual plate and the plate size set on this machine. Then install and set the<br />
correct plate.<br />
15. Plate moves back and forth, and set the<br />
skew right.Then cut 2 plates with about<br />
280mm and discharge them forcibly.<br />
ready to road<br />
Plate cover<br />
<strong>TDP</strong>-<strong>459</strong>
Change language