TDP-459 Users Guide - MItsubishi Imaging
TDP-459 Users Guide - MItsubishi Imaging
TDP-459 Users Guide - MItsubishi Imaging
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 2 Installation and Setup<br />
2.7 Installing the plate tray<br />
A plate cutter is installed inside the plate discharge port. Do not put fingers. Doing<br />
so can cause injure.<br />
1. Insert one of the claws of the plate tray into<br />
the corresponding mounting hole for the<br />
plate tray.<br />
2. While slightly widening the plate tray,<br />
insert the other claw into the other<br />
mounting hole.<br />
3. Secure the tray by inserting the bottom of<br />
the stopper into the stopper slit.<br />
<strong>TDP</strong>-<strong>459</strong><br />
Stacking quantity is up to 5 plates<br />
on the plate tray.<br />
Do not stack more than 5 plates on<br />
it.<br />
- 16 -<br />
Plate exit<br />
Plate tray<br />
Stopper