TDP-459 Users Guide - MItsubishi Imaging
TDP-459 Users Guide - MItsubishi Imaging
TDP-459 Users Guide - MItsubishi Imaging
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 2 Installation and Setup<br />
Chapter 2 Installation and Setup<br />
2.1 Unpacking and setup procedure<br />
This chapter explains procedures from unpacking to setting up the Thermal Digiplater.<br />
Be sure to read Chapter 1 Safety Precautions before proceeding to this chapter.<br />
Perform the following to unpack and install:<br />
1. Open the box and take out the Thermal Digiplater and accessories.<br />
2. Check the names and functions of the Thermal Digiplater’s parts.<br />
3. Take out the protective inserts.<br />
4. Connect the power cable..<br />
5. Connect the USB cable<br />
6. Install the plate tray.<br />
7. Turn on the power switch.<br />
8. Set the spools to the plate and place the plate into the Thermal Digiplater.<br />
<strong>TDP</strong>-<strong>459</strong><br />
- 8 -