TDP-459 Users Guide - MItsubishi Imaging

Chapter 1 Safety Precautions
1.4 Handling plate before and after platemaking
When handling plate, observe the following instructions:
When handling plate before platemaking:
Use plate specified by Mitsubishi Paper Mills, Ltd.
Wrap the plate with the black polybag and avoid high temperature and high
humidity, and store it in the cool and dark place.
(at a temperature of 30(86°F) or lower and a humidity of 60% RH or less)
Do not touch the plate surface with your hand.
Finger prints can deteriorate the printing quality.
When handling plate after platemaking:
Store plates avoiding direct sunlight.
Store plates away from organic solvents such as benzine, thinner and alcohol. In
addition, avoid direct contact with hands.
If the printed images come into contact with hands or any of these substances,
discoloration can occur to the plates.
TDP-459
- 6 -