Instant Reverse - Visual Paradigm

SDE-VS User’s Guide (Part 1) Chapter 2 – Working with Diagrams
2. Select Diagramming > Environment tag.
Figure 2.142 - Select Environment tag
To enable/disable the guide lines, check/uncheck the option Show diagram alignment guide.
Figure 2.143 - Enable/disable the guide lines
You can also change the guide line style by choosing Show edges or Show center.
Figure 2.144- Change the style of guide lines
If you choose Show center, the guide line shows the center of the closest shape.
Figure 2.145 - Show center of the closest
shape
If you choose Show edges, the guide lines show the edge of the closest shape.
Figure 2.146 - Show edges of the closest
shape
2-55