Instant Reverse - Visual Paradigm

SDE-VS User’s Guide (Part 1) Chapter 2 – Working with Diagrams
Enabling/Disabling the Resource-Centric Interface
To enable/disable the resource centric interface feature, select/deselect menu View > Resource Centric. This option will be
applied to all diagrams.
Figure 2.25 - Enable/Disable
Resource Centric Interface
Enabling/Disabling Group Resource-Centric Interface
Group resources appear when two or more shapes are selected. They are used to perform actions on the selected shapes, e.g.
alignment and distribute shapes.
To enable/disable, select Modeling > Application Options... to open the Options dialog box, select Diagramming >
Resource Centric tab. This option will be applied to all diagrams.
Figure 2.26 - Group Resources Centric Interface for use case
Show Extra Resources
By default the resource centric interface displays the most commonly used resources of a diagram element. You can choose to
view less common resourcesby clicking on the View > Show Extra Resources in the main menu. The figures below show the
view of a Action element with "Show Extra Resources" turned off and on.
Figure 2.27 - Resource-Centric of Action Figure 2.28 - Action with an Extra Resource-Centric
2-9