Everything You Need To Know About Cox Business Internet Service.
Everything You Need To Know About Cox Business Internet Service. Everything You Need To Know About Cox Business Internet Service.
14 WINDOWS 7 SETUP AND CONFIGURATION For Cox Business Internet, the following networking components need to be installed along with Windows on your computer: Client for Microsoft Networks and TCP/IP Protocol software. If these components are not already installed on your computer, refer to your Windows installation CD for installation instructions. If you are using a router, you should not be configuring your Cox provided static IP address using these instructions, but should enter the static IP information into your router following the router’s user guide instructions. To set up the TCP/IP configuration from the desktop: STEP 1 From the Start menu, right-click Network, then select Properties. STEP 2 On the left-hand side of the window, click the Change adapter settings link. STEP 3 Right click on the correct Local Area Connection, then select Properties. STEP 4 Select Internet Protocol Version 4 (TCP/ IPv4), then click the Properties button.
Static IP Setup Instructions In this section you will need your specific Subnet Mask, Default Gateway, Primary/ Preferred DNS Server, and Secondary/Alternative DNS server information included in the Account Information sheet, provided in your Welcome Kit. Please be sure to enter the addresses exactly as they appear in your documentation. STEP 5-Static Under Internet Protocol (TCP/IP) Properties screen under General tab, select the following: • First, select Use the following IP address. • Type in the static IP address assigned to you in the IP Address field. • Type in your Subnet Mask and gateway listed on your Account Information sheet. • In Default gateway, type in your gateway address from your Account Information sheet. STEP 6-Static Next, select the Use the following DNS server addresses radio button. In the Preferred DNS server and Alternate DNS server fields, type in the DNS server addresses listed on the Account Information sheet (DNS addresses can be found on p. 34). STEP 7-Static Click on the OK button and then the OK/Close button, and that’s it. Dynamic IP Setup Instructions STEP 5-Dynamic From the General tab, verify that Obtain an IP address automatically and Obtain DNS server address automatically are selected. Click the Advanced button. 15
- Page 1: FPO SM COX BUSINESS INTERNET Everyt
- Page 4 and 5: 4 COX BUSINESS INTERNET SM TABLE OF
- Page 6 and 7: 6 TCP/IP CONFIGURATION GUIDE This s
- Page 8 and 9: 8 Dynamic IP Setup Instructions STE
- Page 10 and 11: 10 WINDOWS VISTA SETUP AND CONFIGU
- Page 12 and 13: 12 Dynamic IP Setup Instructions ST
- Page 16 and 17: 16 STEP 6-Dynamic From the IP Setti
- Page 18 and 19: 18 STEP 3 In the drop down for Show
- Page 20 and 21: 20 SETTING UP AND USING COX BUSINES
- Page 22 and 23: 22 NOTE: Cox Business Email will lo
- Page 24 and 25: 24 STEP 3 Scroll to the password se
- Page 26 and 27: 26 STEP 3 Enter the Incoming Server
- Page 28 and 29: 28 STEP 2 From the General Email Pr
- Page 30 and 31: 30 STEP 5 Select additional desired
- Page 32 and 33: 32 MAIL FORWARDING STEP 1 From the
- Page 34 and 35: 34 STEP 5 Click the Close. GROUPS G
- Page 36 and 37: 36 STEP 3 Matching contact informat
- Page 38 and 39: 38 COX BUSINESS EMAIL SPAMBLOCKER (
- Page 40 and 41: 40 CONFIGURING COX BUSINESS EMAIL O
- Page 42 and 43: 42 STEP 6 On the Advanced tab, sele
- Page 44 and 45: 44 STEP 7 Under the Advanced tab, c
- Page 46 and 47: 46 STEP 7 Click on Next. STEP 8 Cli
- Page 48 and 49: 48 STEP 7 Enter the Account name an
- Page 50 and 51: 50 SETTING UP MAIL IN MICROSOFT WIN
- Page 52 and 53: 52 STEP 12 • On the Advanced tab,
- Page 54 and 55: 54 IMAP Configuration Instructions
- Page 56 and 57: 56 STEP 7 On the Accounts tab, sele
- Page 58 and 59: COX BUSINESS EMAIL CUSTOMER CONTROL
- Page 60 and 61: NOTE: If the user is also designate
- Page 62: TECHNICAL SUPPORT AND TROUBLESHOOTI
14<br />
WINDOWS 7 SETUP AND CONFIGURATION<br />
For <strong>Cox</strong> <strong>Business</strong> <strong>Internet</strong>, the following networking components need to be installed<br />
along with Windows on your computer: Client for Microsoft Networks and TCP/IP<br />
Protocol software. If these components are not already installed on your computer, refer<br />
to your Windows installation CD for installation instructions.<br />
If you are using a router, you should not be configuring your <strong>Cox</strong> provided static IP<br />
address using these instructions, but should enter the static IP information into your<br />
router following the router’s user guide instructions.<br />
<strong>To</strong> set up the TCP/IP configuration from the desktop:<br />
STEP 1<br />
From the Start menu, right-click<br />
Network, then select Properties.<br />
STEP 2<br />
On the left-hand side of the window,<br />
click the Change adapter settings link.<br />
STEP 3<br />
Right click on the correct Local Area<br />
Connection, then select Properties.<br />
STEP 4<br />
Select <strong>Internet</strong> Protocol Version 4 (TCP/<br />
IPv4), then click the Properties button.
Change language