Sunshine Kids Radian 65 Instruction Manual

More documents

Recommendations

Info

• ALWAYS use SafeStop with LATCH installation for forward-facing child below 40 lbs (see page 26).
5. 6. 3 Installation Tip: Unfasten fabric side panels and reach behind restraint cover for easy access to belt path. (Fig. 3) Confirm LATCH belt lays flat and is not twisted. Attach each connector to the LATCH anchor closest to each side of the restraint. (Fig. 4) • LATCH connector will ‘click’ to confirm attachment to anchor. Kneel on restraint to force it into vehicle seat while pulling LATCH belt tight. (Fig. 5) Vehicle cushions should compress where there is contact with restraint. Tightening Tip: For best results: Pull loose end of LATCH strap through back of restraint to tighten. (Fig. 6) Check List: Confirm restraint is properly positioned. Confirm LATCH belt is tight and that connections to approved LATCH anchorss are secure. Confirm restraint is stable (see page 25). Removal: Press red release button on back of each LATCH connector. Disconnect top tether. Properly store LATCH belt and top tether.
Page 2 and 3: Warnings 4 Seating Position Informa
Page 4: • Follow all instructions labeled
Page 13: Push down metal tab to lock base (F
Page 19: fastened.
Page 23 and 24: Forward-Facing Lap-Shoulder Belt In
Page 25 and 26: Forward-Facing Lap Belt Installatio
Page 27 and 28: Operating Adjustable Bottom Fig. 1
Page 29 and 30: Top Tether (continued) 3. Install r
Page 31 and 32: Using Harness Clip + IMPORTANT: Pos
Page 33 and 34: Properly Securing Child (continued)
Page 35 and 36: Harness Buckle Location Confirm loc
Page 37 and 38: Locking a Vehicle Lap-Shoulder Belt
Page 39 and 40: Cleaning and Maintenance Cleaning /
Page 41 and 42: Cleaning and Maintenance (continued
Page 43 and 44: expressed or implied. In no event w

Sunshine Kids Radian 65 Instruction Manual

Create successful ePaper yourself

Delete template?

Save as template?