the Smart Oven™ - Breville

BEFORE FIRST USE
PREPARING THE OVEN FOR USE
NOTE
In order to remove any protective
substances inside the oven, it is
necessary to run the oven empty for
20 minutes.
1. Remove and safely discard any packing
material, promotional labels and tape
from the oven.
2. Remove the crumb tray, wire rack, grill
rack, baking pan and pizza pan from the
packaging. Wash them in warm, soapy
water with a soft sponge, rinse and dry
thoroughly. Insert the crumb tray into
the oven.
3. Wipe the interior of the oven with a soft
damp sponge. Dry thoroughly.
4. Place the oven on a flat, dry surface.
Ensure there is a minimum distance
of 20cm of space on both sides of the
appliance. Ensure there are no items on
top of the oven.
5. Unwind the power cord completely and
insert the power plug into a grounded
wall outlet.
6. The oven alert will sound twice and the
LCD screen will illuminate blue. The
function options will appear with an
indicator on the preset BAKE function.
7. Turn the FUNCTION dial to the right
until the indicator reaches the PIZZA
function. The top figure on the LCD screen
indicates the preset temperature of 210ºC.
Turn the temperature dial clockwise
to 230ºC. Keep the preset time of 20
minutes. The preset CONVECTION
setting and preset FROZEN FOODS
setting will also be displayed.
PIZZA DEFAULT
FUNCTION
DIAL
ROTATE
PIZZA
8. Press the START/CANCEL button
to activate this setting. The button
surround will illuminate red and the
oven alert will sound.
9. The LCD screen will flash
PREHEATING. Once the oven has
reached the set temperature, the
temperature alert will sound.
10. The timer will be displayed and
automatically begin to count down in
one minute increments.
NOTE
When the oven is turned on for the first
time, it may emit vapors. This is due
to the protective substances inside the
oven. It is safe and not detrimental to
the performance of the oven.
11. At the end of the cooking cycle, the oven
alert will sound three times and the
START/CANCEL button surround will
cease to illuminate.
12. The oven is now ready to use.
NOTE
The cooking cycle can be stopped at any
time by pressing the START/CANCEL
button. This will cancel the cycle, the
button surround illumination will go out
and LCD screen will change to blue.
15