om, rz3016, 2009-04, 966042901, zero turn, consumer - Husqvarna
om, rz3016, 2009-04, 966042901, zero turn, consumer - Husqvarna
om, rz3016, 2009-04, 966042901, zero turn, consumer - Husqvarna
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Front Wheel Mount<br />
Lubricate with a grease gun, one zerk for each wheel<br />
mount, until the grease is forced out.<br />
Use only good quality bearing grease.<br />
Grease fr<strong>om</strong> well-known brand names (petrochemical<br />
c<strong>om</strong>panies, etc.) usually maintains a good quality.<br />
Front Wheel Bearings<br />
Lubricate with a grease gun, one zerk for each set of<br />
wheel bearings, until the grease is forced out.<br />
Use only good quality bearing grease.<br />
Deck spindle<br />
Lower the cutting deck c<strong>om</strong>pletely.<br />
If you use grease gun without rubber hose, remove the<br />
foot plate to access deck spindle zerk.<br />
Lubricate with a grease gun, one zerk, 2-3 strokes.<br />
Use only good quality bearing grease.<br />
IMPORTANT INFORMATION<br />
Use minimal lubrication and remove excess<br />
lubricant so that is does not c<strong>om</strong>e into contact<br />
with belts or belt pulley drive surfaces.<br />
LUBRICAtION<br />
Lubricating the wheel bearings<br />
8050-009<br />
8050-027<br />
Lubricating the deck spindle after removing the foot plate<br />
HUSQVARNA-43
Change language