You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Troubleshooting<br />
Problem Advice<br />
Optical output does<br />
not work<br />
Optical input does<br />
not work.<br />
ADAT Sync In does<br />
not work correctly.<br />
MIDI does not work<br />
correctly.<br />
1. Check if you connected the cable correctly: You<br />
should see a red light coming out of the optical cable<br />
that comes from the output of your LAGOON card.<br />
2. Check if you chose the correct output <strong>for</strong>mat<br />
(S/PDIF or ADAT) in the LAGOON Tools General<br />
page.<br />
3. Check MME Output device settings in the<br />
LAGOON Tools MME page. Maybe No output<br />
device is selected.<br />
4. Check your application software output<br />
configuration. Maybe the LAGOON card is not<br />
selected as output device.<br />
1. Check if you connected the cable correctly: You<br />
should see a red light coming out of the optical cable<br />
that comes from the output of your external<br />
equipment.<br />
2. Check if you chose the correct input <strong>for</strong>mat (S/PDIF<br />
or ADAT) in the LAGOON Tools General page.<br />
3. Check MME Input device settings in the LAGOON<br />
Tools MME page. Maybe No input device is<br />
selected.<br />
4. Check your application software input<br />
configuration. Maybe the LAGOON card is not<br />
selected as input device.<br />
1. Check Clock source settings in the LAGOON Tools<br />
General page. You must choose ADAT Sync In.<br />
2. Check if the MIDI Input device is enabled in the<br />
LAGOON Tools MIDI page (only necessary <strong>for</strong><br />
Time Code synchronization).<br />
3. Check your application software MIDI input<br />
configuration. Maybe the LAGOON card is not<br />
selected as MIDI input device (only necessary <strong>for</strong><br />
Time Code synchronization).<br />
1. Check Clock source settings in the LAGOON Tools<br />
General page. You must not choose ADAT Sync In.<br />
2. Check if the MIDI Input device is enabled in the<br />
LAGOON Tools MIDI page.<br />
3. Check your application software MIDI input<br />
configuration. Maybe the LAGOON card is not<br />
selected as MIDI input device.<br />
25