You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MIDI Errors<br />
MIDI errors are related to the MIDI input of the LAGOON card. Receiving MIDI<br />
data is possible in two ways: MIDI data coming in from the LAGOON MIDI cable<br />
connected to your external MIDI equipment or MIDI data coming in from the ADAT<br />
Sync cable connected to your ADAT recorder.<br />
Frame error<br />
Overflow<br />
Driver version<br />
mismatch<br />
DSP error<br />
Error Possible Reasons and Remarks<br />
Error Possible Reasons and Remarks<br />
Loss of realtime<br />
There was an error in receiving MIDI bytes. The<br />
start bit, the stop bit, or both of them are not<br />
detected correctly. Check your MIDI cable and<br />
external equipment.<br />
Some of the incoming MIDI data had to be discarded.<br />
Perhaps your PC was unable or too busy to process<br />
MIDI data fast enough.<br />
General Errors<br />
General errors are related to the basic function of the LAGOON card and its driver.<br />
1. The version number of the driver and the version<br />
number of the LAGOON Tools are different.<br />
Download the newest LAGOON Tools and driver<br />
from http://www.m-audio.com.<br />
2. You are using a LAGOON card which does not fit the<br />
driver. Contact M-<strong>Aud</strong>io tech support <strong>for</strong> a correct<br />
driver version.<br />
Something inside the DSP went wrong. Please shut<br />
down Windows and power cycle your PC. If this<br />
error appears again, contact M-<strong>Aud</strong>io tech support.<br />
The DSP was unable to transmit as many data as<br />
necessary to the PC within a given time. Probably<br />
some other PCI card blocks the PCI bus heavily.<br />
Refer to Troubleshooting.<br />
23
Change language