M3-LED Manual - OpticsPlanet.com

More documents

Recommendations

Info

SWITCH OPERATION ROCKER: The rocker switch is part of the backplate and no attempt should be made to disassemble it. NOTE: The rocker switch controls the white light only. The rocker switch has two positions, MOMENTARY and STEADY ON. CAUTION Rocker Rotary Mode Selector / Push-Button Never place the light on its face (bulb down) while ON. The bulb generates intense heat and could cause damage to the M3-LED or the surface it is on. 10
SWITCH OPERATION (continued) STEADY-ON OFF MOMENTARY-ON MOMENTARY-ON OFF STEADY-ON CAUTION Keep your fingers away from the trigger until you are ready to fire. MOMENTARY-ON MODE: Pressing & holding the rocker switch in the Momentary- On position will make the light turn on and stay on until the rocker switch is released. STEADY-ON MODE: Pressing the rocker switch in the Steady-On position will make the light come on and stay on until the rocker switch is pushed back to the OFF position. 11
Page 1 and 2: M3-LED Operator’s Manual MADE IN
Page 3 and 4: WARNINGS 1. Before handling any fir
Page 5 and 6: 10. Do Not operate the M3-LED aroun
Page 7 and 8: M3-LED PARTS DIAGRAM (continued) It
Page 9 and 10: 1. With your “cleared and safe”
Page 11: DISMOUNTING (continued) Step 1. Pla
Page 15 and 16: SWITCH OPERATION (continued) ADDITI
Page 17 and 18: BULB REPLACEMENT Dismount the M3-LE
Page 19 and 20: BATTERY REPLACEMENT (continued) 1.
Page 21 and 22: IDENTIFICATION NUMBER 1. While hold
Page 23 and 24: SERVICE: THE M3-LED For service or

M3-LED Manual - OpticsPlanet.com

Create successful ePaper yourself

Delete template?

Save as template?