Enterprise QoS Solution Reference Network Design Guide

Catalyst 6500 PFC2/PFC3—QoS Considerations and Design
show qos acl
2-88
1 1
2 2
3 3
4 4
5 5
6 6
7 7
0,8,24,46 8
9 9
10 10
63 63
DSCP - Policed DSCP map excess-rate:
DSCP Policed DSCP
-------------------------------- ------------
0 0
1 1
2 2
3 3
4 4
5 5
63 63
CAT6500-PFC2-CATOS> (enable)
Enterprise QoS Solution Reference Network Design Guide
Chapter 2 Campus QoS Design
The Catalyst 6500 CatOS show qos acl verification command returns information about ACLs and ACEs
that have been configured for QoS purposes. ACL information can be displayed for configuration ACLs
or runtime ACLs.
In the example below, three variations of the show qos acl command are displayed.
The first one displays the QoS ACLs that are still in the edit-buffer and indicates whether or not the
ACL(s) have been committed to PFC hardware. In this example, the ACL “SOFTPHONE-PC-3-1” has
been committed to the PFC.
The second example displays runtime ACE level information for a given ACL (or all ACLs, if the
keyword all is used instead of the ACL name). Each ACE’s DSCP markings, associated aggregate
policer, and filtering criteria are displayed.
The third example displays the VLANs and/or ports that the ACL has been applied to. In this specific
example, port 3/1 has the SOFTPHONE-PC-3-1 ACL applied to it.
Example 2-58 Show QoS ACL Verification for Catalyst 6500 Switch—CatOS
CAT6500-PFC2-CATOS> (enable) show qos acl editbuffer
ACL Type Status
-------------------------------- ---- ----------
SOFTPHONE-PC-3-1 IP Committed
CAT6500-PFC2-CATOS> (enable)
CAT6500-PFC2-CATOS> (enable) show qos acl info runtime SOFTPHONE-PC-3-1
set qos acl IP SOFTPHONE-PC-3-1
----------------------------------------------
1. dscp 46 aggregate SOFTPHONE-VOICE-PC-3-1 udp any any range 16384 32767
2. dscp 24 aggregate SOFTPHONE-SIGNALING-PC-3-1 tcp any any range 2000 2002
3. dscp 0 aggregate PC-DATA-PC-3-1 any
CAT6500-PFC2-CATOS> (enable)
Version 3.3