CCNP TSHOOT 6.0 - Cisco Learning Home

CCNPv6 TSHOOT
DLS1(config)#
Dec 6 17:04:47.577: RADIUS/ENCODE(0000000F): ask "Username: "
DLS1(config)#
Dec 6 17:04:55.715: RADIUS/ENCODE(0000000F): ask "Password: "
DLS1(config)#
Dec 6 17:05:05.439: RADIUS/ENCODE(0000000F):Orig. component type = EXEC
Dec 6 17:05:05.439: RADIUS: AAA Unsupported Attr: interface [170] 4
Dec 6 17:05:05.439: RADIUS: 74 74 [ tt]
Dec 6 17:05:05.439: RADIUS/ENCODE(0000000F): dropping service type, "radius-ser
ver attribute 6 on-for-login-auth" is off
Dec 6 17:05:05.439: RADIUS(0000000F): Config NAS IP: 0.0.0.0
Dec 6 17:05:05.439: RADIUS/ENCODE(0000000F): acct_session_id: 15
Dec 6 17:05:05.439: RADIUS(0000000F): se
DLS1(config)#nding
Dec 6 17:05:05.439: RADIUS/ENCODE: Best Local IP-Address 10.1.50.252 for Radius
-Server 10.1.50.1
Dec 6 17:05:05.439: RADIUS(0000000F): Send Access-Request to 10.1.50.1:1812 id
1645/12, len 82
Dec 6 17:05:05.439: RADIUS: authenticator 7E D1 DF 37 75 69 EC 91 - 42 FC 2E 7
8 D7 9B 5B 3B
Dec 6 17:05:05.439: RADIUS: User-Name [1] 9 "raduser"
Dec 6 17:05:05.439: RADIUS: User-Password [2] 18 *
Dec 6 17:05:05.439: RADIUS: NAS-Port [5] 6 1
DLS1(config)#
Dec 6 17:05:05.439: RADIUS: NAS-Port-Id [87] 6 "tty1"
Dec 6 17:05:05.439: RADIUS: NAS-Port-Type [61] 6 Virtual
[5]
Dec 6 17:05:05.439: RADIUS: Calling-Station-Id [31] 11 "10.1.10.1"
Dec 6 17:05:05.439: RADIUS: NAS-IP-Address [4] 6 10.1.50.252
Dec 6 17:05:05.447: RADIUS: Received from id 1645/12 10.1.50.1:1812, Access-Acc
ept, len 26
Dec 6 17:05:05.447: RADIUS: authenticator 75 81 E4 CD 45 1D F6 14 - 5D 1F AD F
4 D4 83 D
DLS1(config)#5 FE
Dec 6 17:05:05.447: RADIUS: Session-Timeout [27] 6 9999999
Dec 6 17:05:05.447: RADIUS(0000000F): Received from id 1645/12
The above example shows the exchange between the RADIUS client and server when the client is using the
same port numbers as the server and a legitimate user attempts to login. Note the Access-Accept message.
Unsuccessful login from PC-B (using invalid username baduser):
DLS1(config)#
Dec 6 17:10:00.346: RADIUS/ENCODE(00000010): ask "Username: "
DLS1(config)#
Dec 6 17:10:06.722: RADIUS/ENCODE(00000010): ask "Password: "
DLS1(config)#
Dec 6 17:10:16.580: RADIUS/ENCODE(00000010):Orig. component type = EXEC
Dec 6 17:10:16.580: RADIUS: AAA Unsupported Attr: interface [170] 4
Dec 6 17:10:16.580: RADIUS: 74 74 [ tt]
Dec 6 17:10:16.580: RADIUS/ENCODE(00000010): dropping service type, "radius-ser
ver attribute 6 on-for-login-auth" is off
All contents are Copyright © 1992–2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 13 of 22