CCNP TSHOOT 6.0 - Cisco Learning Home

CCNPv6 TSHOOT
Step 3: Configure SRV1 and start the RADIUS server.
a. Configure SRV1 with the static IP address 10.1.50.1/24 and default gateway 10.1.50.254.
b. Start the WinRadius server application on SRV1. If the WinRadius server is not installed, contact your
instructor.
c. From the menu, select Operation > Add User and create a new user named raduser with a
password of RadUserpass. Click OK.
Note: Passwords are case-sensitive.
d. To clear the log on the WinRadius server, select Log > Clear from the main menu.
Note: If you exit the WinRadius server application and restart it, you must recreate the user raduser. A
maximum of five users can be created using the free version of the software.
Step 4: Release and renew the DHCP lease on PC-B.
a. Ensure that PC-B is configured as a DHCP client in the OFFICE VLAN.
b. After loading all TT-A device configuration files, issue the ipconfig /release and ipconfig
/renew commands on PC-B.
Step 5: Outline the troubleshooting approach and validation steps.
Use this space to identify your troubleshooting approach and the key steps to verify that the problem is
resolved. Troubleshooting approaches to select from include the follow-the-path, spot-the-differences, bottomup,
top-down, divide-and-conquer, shoot-from-the-hip, and move-the-problem methods.
Note: In addition to a specific approach, you can use the generic troubleshooting process described at the
beginning of Section 2 of this lab.
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
Step 6: Record the troubleshooting process and configuration changes.
Note: Section 2 of this lab includes useful commands and examples of output.
Use this log to document your actions and results during the troubleshooting process. List the commands you
used to gather information. As you progress, record what you think the problem might be and the actions you
take to correct the problem.
All contents are Copyright © 1992–2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 4 of 22