19.07.2013 Views

CCNP TSHOOT 6.0 - Cisco Learning Home

CCNP TSHOOT 6.0 - Cisco Learning Home

CCNP TSHOOT 6.0 - Cisco Learning Home

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>CCNP</strong>v6 <strong>TSHOOT</strong><br />

Section 1—Trouble Tickets and Troubleshooting Logs<br />

Task 1: Trouble Ticket Lab 9-1 TT-A<br />

Step 1: Review trouble ticket Lab 9-1 TT-A.<br />

As a security measure, your company has decided to implement centralized server-based AAA authentication<br />

for key network devices, such as routers and switches. The implementation plan specifies that RADIUS<br />

server software is to be installed on SRV1 (see Appendix A for the installation procedure). As a pilot, Layer 3<br />

core switch DLS1 is to be configured with AAA to access the RADIUS server for login authentication. The<br />

implementation plan specifies RADIUS as the primary method of authentication, with local authentication as<br />

the backup method.<br />

Your colleague has configured the RADIUS server on SRV1 and AAA login authentication on DLS1 but is<br />

having trouble accessing DLS1 when attempting to log in via Telnet from PC-B. On the RADIUS server, he<br />

has created a test username raduser with a password of RadUserpass.<br />

He has asked for your help in diagnosing and solving the problem.<br />

Note: The freeware server WinRadius is used for this trouble ticket.<br />

Step 2: Load the device trouble ticket configuration files for TT-A.<br />

Using the procedure described in Lab 3-1, verify that the lab configuration files are present in flash. Load the<br />

proper configuration files as indicated in the Device Configuration File table.<br />

Note: The following device access methods are in effect after installing RADIUS on SRV1 and loading the<br />

configuration files:<br />

• Console access requires no username or password.<br />

• Telnet and SSH require username admin and password adminpa55 (except for DLS1, which uses<br />

RADIUS).<br />

• The enable password is ciscoenpa55.<br />

Device Configuration File Table<br />

Device Name File to Load Notes<br />

ALS1 Lab91-ALS1-TT-A-Cfg.txt<br />

DLS1 Lab91-DLS1-TT-A-Cfg.txt<br />

DLS2 Lab91-DLS2-TT-A-Cfg.txt<br />

R1 Lab91-R1-TT-A-Cfg.txt<br />

R2 Lab91-R2-TT-A-Cfg.txt<br />

R3 Lab91-R3-TT-A-Cfg.txt<br />

SRV1 N/A Static IP: 10.1.50.1/24<br />

Default gateway: 10.1.50.254<br />

PC-B N/A DHCP<br />

PC-C N/A Static IP: 10.1.80.100/24<br />

Default gateway: 10.1.80.1<br />

All contents are Copyright © 1992–2010 <strong>Cisco</strong> Systems, Inc. All rights reserved. This document is <strong>Cisco</strong> Public Information. Page 3 of 22

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!