Stateful Switchover.pdf - Cisco Learning Home
Stateful Switchover.pdf - Cisco Learning Home
Stateful Switchover.pdf - Cisco Learning Home
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Restrictions for <strong>Stateful</strong> <strong>Switchover</strong><br />
6<br />
<strong>Stateful</strong> <strong>Switchover</strong><br />
– 8-port OC-3/STM-1c ATM<br />
– 16-port OC-3 POS<br />
• The following Engine-4 line cards are supported:<br />
– 1-port OC-192 POS<br />
– 4-port OC-48 POS<br />
• The following IP Service Engine (ISE) line cards are supported:<br />
– 4-port OC-3c/STM-1c POS/SDH ISE<br />
– 8-port OC-3c/STM-1c POS/SDH ISE<br />
– 16-port OC-3c/STM-1c POS/SDH ISE<br />
– 4-port OC-12c/STM-4c POS/SDH ISE<br />
– 1-port OC-48c/STM-16c POS/SDH ISE<br />
– 4-port channelized OC-12/STM-4 (DS3/E3, OC-3c/STM-1c) POS/SDH ISE<br />
– 1-port channelized OC-48/STM-16 (DS3/E3, OC-3c/STM-1c) POS/SDH ISE<br />
– 4-port OC-12c/STM-4c DPT ISE<br />
<strong>Cisco</strong> 10000 Series Internet Router Platform Restrictions<br />
• SSO supports TFTP boot operation on the <strong>Cisco</strong> 10000 series Internet routers.<br />
• The following line cards support SSO and <strong>Cisco</strong> NSF:<br />
– 6-port Universal (Channelized or Clear-channel) DS3<br />
– 8-port E3/DS3<br />
– 1-port OC-12 POS<br />
– 6-port OC-3 POS<br />
– 1-port Gigabit Ethernet<br />
– 1-port Channelized OC-12<br />
– 4-port Channelized STM1<br />
– 24-port channelized E1/T1<br />
– 1-port OC-12 ATM<br />
– 4-port OC-3 ATM<br />
<strong>Stateful</strong> <strong>Switchover</strong><br />
<strong>Cisco</strong> 7500 Series Internet Router Platform Restrictions<br />
• SSO does not support TFTP boot operation on the <strong>Cisco</strong> 7500 series Internet routers. The software<br />
images must be downloaded to the Flash memory cards on the router.<br />
• SSO operates only on a <strong>Cisco</strong> 7500 series Internet router that has VIPs as the port adapters. Systems<br />
with legacy interface processors not compatible with RPR+ or SSO mode will always get reset and<br />
reloaded upon switchover.<br />
• To support SSO, a router must have either a combination of two RSP8 and RSP16 devices or a<br />
combination of RSP2 and RSP4 devices. A combination of RSP8 or RSP16 with RSP2 or RSP4<br />
devices on a platform is not supported. Only the <strong>Cisco</strong> 7507 and <strong>Cisco</strong> 7513 support dual processors,<br />
which is required to support SSO.