3 - Konica Minolta

Administrator mode 3
Status Notification Setting page
Item Description
Notification Address Type in the notification address.
Replenish Paper Tray Notifies when the paper tray runs out of paper.
JAM Notifies when a paper misfeed occurs.
PM Call Notifies when a periodic inspection should be performed.
Replace Staples Notifies when there are no more staples.
Replenish Toner Notifies when there is no toner.
Finisher Tray Full Notifies when the finisher tray capacity has been reached.
Service Call Notifies when there is a service call.
Job Finished Notifies when the job is completed (successfully).
Hole-Punch Scrap Box Full Notifies when the punch scraps must be removed.
Waste Toner Box Full Notifies when the waste toner box must be replaced.
Imaging Unit Yield Notifies when the imaging unit must be replaced.
Fusing Unit Yield Notifies when the fusing unit must be replaced.
Transfer Roller Yield Notifies when the transfer roller unit must be replaced.
Transfer Belt Unit Yield Notifies when the image transfer belt unit must be replaced.
Ozone Filter Yield Notifies when the ozone filter must be replaced.
If the notification destination is specified as an IP address, specify the port number and community name.
Before typing in a host name, check the "Please check to enter host name." check box.
If the notification destination is specified as an IPX address, specify the node address and community name.
! Detail
The information that appears as "the printer location" in the e-mail message sent with the status
notification function is specified in the "Printer Location" box on the page displayed by clicking "IPP
Setting" in the menu on the Network tab. For details on "Printer Location", refer to "IPP Setting" on
page 3-65.
C650 3-5