3 - Konica Minolta

Administrator mode 3
Item Description
No. Displays the number of the LDAP server.
LDAP Server Name Type in the name of the LDAP server.
Server Address Type in the address of the LDAP server. (Format: ***.***.***.*** or FQDN: Range for
***: 0 to 255) The only symbols that can be used are the dash (-) and period (.). To
type in a host name, check the "Please check to enter host name." check box. If
the machine is set to use IPv6, an IPv6 address can also be specified.
Port Number Type in the port number to be used for communication with the LDAP server.
(Range: 1 to 65535)
Enable SSL
Select whether or not to use SSL/TLS to communicate with the LDAP server.
Port Number (SSL)
Search Base Specify the starting point for LDAP searches (up to 255 characters).
Timeout Type in the amount of time until an LDAP search times out. (Range: 5 to 300 seconds)
Max. Search Results Type in the maximum that can be received as LDAP search results. (Range: 5 to
1000)
Authentication Method Select the LDAP authentication method. The settings that can be specified differ
depending on the selected authentication method. If "anonymous" is selected, it is
not necessary to specify the domain name, logon name and password.
Login Name If any setting other than "anonymous" is selected as the authentication method,
type in the domain name (up to 255 characters).
Password If any setting other than "anonymous" is selected as the authentication method,
type in the password (up to 128 characters).
Domain Name If "GSS-SPNEGO" is selected as the authentication method, type in the domain
name (up to 64 characters).
Select Server Authentication Select the authentication method for the LDAP server.
Method
Use Referral Select whether or not the referral setting is used.
If referral is used, the upper and lower levels are searched with the search base
specified in the LDAP server settings as the starting point.
Initial Setting for Search Details Specify the conditions for performing a detailed LDAP search. Select "OR", "AND",
"STARTS WITH" or "ENDS WITH" for the name, e-mail address, fax number, last
name, first name, city organization and account.
! Detail
Select the authentication method that is used by the LDAP server being used. For details, refer to the
manual for the LDAP server being used.
If "GSS-SPNEGO" is selected as the authentication method, type in the domain name of Active
Directory.
To specify Active Directory as the LDAP server and select "GSS-SPNEGO" as the authentication
method, specify a DNS server synchronized with Active Directory in the DNS Server Settings of this
machine. For details on the DNS server, refer to "TCP/IP Setting - TCP/IP Setting" on page 3-53
When using Active Directory, specify the date and time on this machine. For details, refer to "Date/Time
Setting - Manual Setting" on page 3-8.
C650 3-64