Ver.1.03 - Konica Minolta

More documents

Recommendations

Info

d) When this screen appears, reboot MFP. And Initialization is completed. After performing Initialization, License Activation Base Function will be disabled. Please refer to [Activation Procedure] and activate the License Activation Base Functions again. Issued by BT-CSO 66 Ver 1.03
Operation procedure when executing particular operation for Customer Engineer 1. When using the License already activated on the other MFP (Refer to fig. below), a. Deactivate the License on the MFP A. b. After the deactivation made on MFP A, it is possible to activate the License again on MFP B. Do not execute Initialization for this purpose, especially on the MFP with License activated. (MFP A) (Please make sure to execute Deactivation.) If executing Initialization, the following operation is required to transfer the License to the other MFP. i. Activate the License on MFP A once. (The License needs to be activated on MFP A.) ii. Deactivate the License. Then it is possible to use deactivated license on other MFP B. Transfer a b License Deactivation MFP A License Activation MFP B 2. When replacing NVRAM for a new one, If replacing NVRAM, please make sure to use the new one. License Management error will occur. The following operation is required to solve that error. If the license is activated, a. execute Repair b. execute Activation after Repair If the license is NOT activated, a. execute Repair b. If Repair is not completed correctly, then execute Initialization. Issued by BT-CSO 67 Ver 1.03
Page 1 and 2:
izhub C203/C253/C353/C451/C550/C650
Page 3 and 4:
• Necessary Information .........
Page 5 and 6:
It is possible to execute this oper
Page 7 and 8:
License Code Use this code to MFP w
Page 9 and 10:
Requirements for using License Acti
Page 11 and 12:
Necessary Information Serial Numbe
Page 13 and 14:
Activation using [License Install U
Page 15 and 16: 1. Gather information from MFP/ Kit
Page 17 and 18: d) Select [Yes] and press [OK]. e)
Page 21 and 22: d) Select the display Language. e)
Page 23 and 24: l) Click [Print] button to print th
Page 25 and 26: d) Select [Select Function]. e) Sel
Page 27 and 28: l) After rebooting MFP, check the f
Page 29 and 30: g) After rebooting MFP, check the f
Page 31 and 32: Deactivation This is the operation
Page 33 and 34: Flow chart for Deactivation There
Page 35 and 36: Deactivation Procedure The followin
Page 39 and 40: h) Activated function list of MFP (
Page 41 and 42: e) Select the License Kit that need
Page 43 and 44: d) Enter the [E-Mail Address] and t
Page 45 and 46: Repair After replacement of the par
Page 47 and 48: Flow chart for Repair There are 3
Page 49 and 50: c) Select [Repair Request Code (Rep
Page 51 and 52: d) Enter the [E-Mail Address] and [
Page 53 and 54: 1. Gather information from MFP 2. A
Page 55 and 56: Issued by BT-CSO 55 Ver 1.03
Page 57 and 58: Initialization code (35 digits) Th
Page 59 and 60: [Initialization Procedure] The foll
Page 61 and 62: d) Select [Yes] and press [OK]. e)
Page 63 and 64: 1. Gather necessary information 1-1
Page 65: 1. Gather necessary information 2.
show all

Ver.1.03 - Konica Minolta

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?