Ver.1.03 - Konica Minolta

More documents

Recommendations

Info

h) Click [OK]. By pressing [Cancel], it is possible to correct what was entered. i) [Repair Code (Repair Permission Code)] and [License Code] is displayed. Print this page by clicking [Print] button or write down the information. * License code is necessary to re-activate the function after the repair operation. * With some condition, the license code may not be displayed. (Ex. When replacing the EEPROM board.) Please pay attention “U” and “V”, “0 (number)” and “O (alphabet)”. “0 (Number)” is not used in [Repair Code (Repair Permission Code)] and [License code]. j) Close the web browser and forward to next step. [3. Repair the MFP] Issued by BT-CSO 52 Ver 1.03
1. Gather information from MFP 2. Access to LMS 3. Repair the MFP (License Error) 3-1. Input Repair Code (Repair Permission Code) to solve the License Error. Input from: •Control Panel • Perform Repair in . a) Enter in Service Mode, and then press “Stop”,”9”. The “Billing Setting” screen will appear. Press [License Management]. b) Press [Repair] on the left side on LCD, and then press [Repair Code (Repair Permission Code)]. c) Enter [Repair Code (Repair Permission Code)] the Press [OK]. * Please pay attention “U” and “V”, “0 (number)” and “O (alphabet)”. “0 (Number)” is not used in [Repair Code (Repair Permission Code)]. d) Make sure the repair code, and then press [Apply]. Issued by BT-CSO 53 Ver 1.03
Page 1 and 2: izhub C203/C253/C353/C451/C550/C650
Page 3 and 4: • Necessary Information .........
Page 5 and 6: It is possible to execute this oper
Page 7 and 8: License Code Use this code to MFP w
Page 9 and 10: Requirements for using License Acti
Page 11 and 12: Necessary Information Serial Numbe
Page 13 and 14: Activation using [License Install U
Page 15 and 16: 1. Gather information from MFP/ Kit
Page 17 and 18: d) Select [Yes] and press [OK]. e)
Page 21 and 22: d) Select the display Language. e)
Page 23 and 24: l) Click [Print] button to print th
Page 25 and 26: d) Select [Select Function]. e) Sel
Page 27 and 28: l) After rebooting MFP, check the f
Page 29 and 30: g) After rebooting MFP, check the f
Page 31 and 32: Deactivation This is the operation
Page 33 and 34: Flow chart for Deactivation There
Page 35 and 36: Deactivation Procedure The followin
Page 39 and 40: h) Activated function list of MFP (
Page 41 and 42: e) Select the License Kit that need
Page 43 and 44: d) Enter the [E-Mail Address] and t
Page 45 and 46: Repair After replacement of the par
Page 47 and 48: Flow chart for Repair There are 3
Page 49 and 50: c) Select [Repair Request Code (Rep
Page 51: d) Enter the [E-Mail Address] and [
Page 55 and 56: Issued by BT-CSO 55 Ver 1.03
Page 57 and 58: Initialization code (35 digits) Th
Page 59 and 60: [Initialization Procedure] The foll
Page 61 and 62: d) Select [Yes] and press [OK]. e)
Page 63 and 64: 1. Gather necessary information 1-1
Page 65 and 66: 1. Gather necessary information 2.
Page 67 and 68: Operation procedure when executing

Ver.1.03 - Konica Minolta

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?