Ver.1.03 - Konica Minolta

More documents

Recommendations

Info

1. Gather information from MFP. 1-1. From MFP, gather those information, [Request Code], [Serial Number] and [Repair Request Code (Repair Demand Code)]. Acquisition procedure: From the control panel 2. Access to LMS 3. Repair the MFP (License Error) • From the control panel, please acquire [Request Code], [Serial Number], and [Repair Request Code (Repair Demand Code)] indicated in . The message “License management error occurred” as picture is displayed when turn on the main power. The normal screen will be displayed when [OK] button or when one minute passed after turning on the main power. The message also displayed on the second line of the message area. a) Enter Service Mode, then press “Stop”, then “9” to display [Billing Setting] screen. b) Select [Repair]. Issued by BT-CSO 48 Ver 1.03
c) Select [Repair Request Code (Repair Demand Code)]. d) [Serial Number], [Repair Request Code (Repair Demand Code)], and [Request Code] is displayed on the LCD. Print it or write down the information. Press Start button to print it. * Request Code is not printed therefore, it is necessary to write down the code. Please pay attention “U” and “V”, “0 (number)” and “O (alphabet)”. “0 (number)” is not used in [Request Code] and [Repair Request Code (Repair Demand Code)]. When printing it, [Repair Request Code (Repair Demand Code)] and [Serial Number] will be printed as sample below. e) Exit from Service Mode, and then forward to next step. [2. Access to LMS]. Issued by BT-CSO 49 Ver 1.03
Page 1 and 2: izhub C203/C253/C353/C451/C550/C650
Page 3 and 4: • Necessary Information .........
Page 5 and 6: It is possible to execute this oper
Page 7 and 8: License Code Use this code to MFP w
Page 9 and 10: Requirements for using License Acti
Page 11 and 12: Necessary Information Serial Numbe
Page 13 and 14: Activation using [License Install U
Page 15 and 16: 1. Gather information from MFP/ Kit
Page 17 and 18: d) Select [Yes] and press [OK]. e)
Page 21 and 22: d) Select the display Language. e)
Page 23 and 24: l) Click [Print] button to print th
Page 25 and 26: d) Select [Select Function]. e) Sel
Page 27 and 28: l) After rebooting MFP, check the f
Page 29 and 30: g) After rebooting MFP, check the f
Page 31 and 32: Deactivation This is the operation
Page 33 and 34: Flow chart for Deactivation There
Page 35 and 36: Deactivation Procedure The followin
Page 39 and 40: h) Activated function list of MFP (
Page 41 and 42: e) Select the License Kit that need
Page 43 and 44: d) Enter the [E-Mail Address] and t
Page 45 and 46: Repair After replacement of the par
Page 47: Flow chart for Repair There are 3
Page 51 and 52: d) Enter the [E-Mail Address] and [
Page 53 and 54: 1. Gather information from MFP 2. A
Page 55 and 56: Issued by BT-CSO 55 Ver 1.03
Page 57 and 58: Initialization code (35 digits) Th
Page 59 and 60: [Initialization Procedure] The foll
Page 61 and 62: d) Select [Yes] and press [OK]. e)
Page 63 and 64: 1. Gather necessary information 1-1
Page 65 and 66: 1. Gather necessary information 2.
Page 67 and 68: Operation procedure when executing

Ver.1.03 - Konica Minolta

Create successful ePaper yourself

Delete template?

Save as template?