Ver.1.03 - Konica Minolta

More documents

Recommendations

Info

1. Gather information from MFP/ Kit 2. Get Deactivation Code 3. MFP Deactivation 3-1. Input [Deactivation Code] to MFP and deactivate functions. Input from: • MFP panel 3-2. Input [Deactivation Complete Code] to LMS. a) Enter in Service Mode, and then press “Stop”,”9”. The “Billing Setting” screen will appear. Select [License Management]. b) Select [Deactivation]. c) Press [Deactivation Code]. d) Input Deactivation Code and press [END]. * Please pay attention “U” and “V”, “0 (number)” and “O (alphabet)”. “0 (Number)” is not used in [Deactivation Code]. Issued by BT-CSO 40 Ver 1.03
e) Select the License Kit that needs Deactivation. f) Press [Apply] after checking the selected Kit and “Deactivation Code” you entered. g) Print out displayed [Deactivation Complete Code] or write it down, and reboot MFP. If you set A4 (SEF) to paper tray, you can press Start button and print the code out. You can check [Deactivation Complete Code] from the following procedure “h)”. h) After rebooting MFP, check the function was deactivated. Service Mode> Billing Setting> License Management> List Confirm that deactivated function is displayed in the [Not Registered] field. Deactivation procedure in MFP completed. i) Exit from Service Mode and go on to the next step [3-2. Input [Deactivation Complete Code] to LMS]. Issued by BT-CSO 41 Ver 1.03
Page 1 and 2: izhub C203/C253/C353/C451/C550/C650
Page 3 and 4: • Necessary Information .........
Page 5 and 6: It is possible to execute this oper
Page 7 and 8: License Code Use this code to MFP w
Page 9 and 10: Requirements for using License Acti
Page 11 and 12: Necessary Information Serial Numbe
Page 13 and 14: Activation using [License Install U
Page 15 and 16: 1. Gather information from MFP/ Kit
Page 17 and 18: d) Select [Yes] and press [OK]. e)
Page 21 and 22: d) Select the display Language. e)
Page 23 and 24: l) Click [Print] button to print th
Page 25 and 26: d) Select [Select Function]. e) Sel
Page 27 and 28: l) After rebooting MFP, check the f
Page 29 and 30: g) After rebooting MFP, check the f
Page 31 and 32: Deactivation This is the operation
Page 33 and 34: Flow chart for Deactivation There
Page 35 and 36: Deactivation Procedure The followin
Page 39: h) Activated function list of MFP (
Page 43 and 44: d) Enter the [E-Mail Address] and t
Page 45 and 46: Repair After replacement of the par
Page 47 and 48: Flow chart for Repair There are 3
Page 49 and 50: c) Select [Repair Request Code (Rep
Page 51 and 52: d) Enter the [E-Mail Address] and [
Page 53 and 54: 1. Gather information from MFP 2. A
Page 55 and 56: Issued by BT-CSO 55 Ver 1.03
Page 57 and 58: Initialization code (35 digits) Th
Page 59 and 60: [Initialization Procedure] The foll
Page 61 and 62: d) Select [Yes] and press [OK]. e)
Page 63 and 64: 1. Gather necessary information 1-1
Page 65 and 66: 1. Gather necessary information 2.
Page 67 and 68: Operation procedure when executing

Ver.1.03 - Konica Minolta

Create successful ePaper yourself

Delete template?

Save as template?