Manual CEPR 96 - Balogh technical center
Manual CEPR 96 - Balogh technical center
Manual CEPR 96 - Balogh technical center
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Manuel instructions <strong>CEPR</strong><strong>96</strong> / MRUC20 M<strong>96</strong>.40.02<br />
SYNTAX<br />
Hexadecimal :<br />
Mnemonic :<br />
EXECUTION<br />
COMMENTS<br />
EXAMPLE<br />
TAG READ 61H<br />
I R<br />
DIRECT ADDRESSING - WITHOUT WAITTING<br />
NC 61 NL NB NE N016 A016 AD16 AT16 04<br />
IR,NE,N016,A016,AD16,AT16.<br />
EXTENDED MEMORY<br />
AT 16 PF<br />
AT16+1 Pf<br />
AD 16<br />
WITHOUT WAITTING<br />
PF+80H<br />
COMMENTS<br />
A read is attempted, if there is no fault, data read from the tag are stored in the memory at the<br />
address AD16, the status (AT16) is updated and give information about the tag. If there is a<br />
fault, only the status (AT16) is updated, the high byte gives informations about the fault (ex: no<br />
tag was present). For more information about the status, see BALOGH STATUS DEFINITION.<br />
SYMBOLS DEFINITION LIMITS<br />
PAGE 54<br />
A0 16<br />
SLAVE<br />
STATUS<br />
PF Pf<br />
TAG<br />
NE Slave number<br />
AT 16 Status storage address<br />
N016 Number of data to read in the tag<br />
A0 16 First address to read in the tag<br />
AD 16 First address in the card to store the read data<br />
N016<br />
See memory<br />
mapping<br />
and<br />
tag mapping<br />
Command to read 10 data at the beginning of an OMX TAG (address 0 to 9) present on<br />
slave 1 transceiver, store them at the address 3000H on the card extended memory and<br />
store the operation status in the accumulator memory at the address F0H (8F0H in 16 bits<br />
addressing)<br />
Mnemonic : IR,1,10,0,3000H,8F0H.
Change language