Manual CEPR 96 - Balogh technical center
Manual CEPR 96 - Balogh technical center
Manual CEPR 96 - Balogh technical center
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SYNTAX<br />
Hexadecimal :<br />
Mnemonic :<br />
EXECUTION<br />
COMMENTS<br />
STACK POINTER INITIALISATION<br />
NC 3F NL 05 04<br />
CSP<br />
SYMBOLS DEFINITION LIMITS<br />
EXAMPLE<br />
Processing to a special reset of the board, on the event "PE0/0" is not ready.<br />
PAGE 53<br />
Manuel instructions <strong>CEPR</strong><strong>96</strong> / MRUC20 M<strong>96</strong>.40.02<br />
3FH<br />
CSP<br />
Initialisation of the stack pointer, the <strong>CEPR</strong><strong>96</strong> kills all subroutines or interrupts under<br />
processing. This command allows to the user to perform a total reset of the program<br />
regardless of program situation, and/or to define the next line to be executed.<br />
It should be used only on specific case as emergency or special cirumstances.<br />
:RESET,<br />
JCB,R0/0_:RESET.<br />
CSP.<br />
J:ORG.
Change language