JAEA-Testing-2011-007.pdf:46.74MB - 日本原子力研究開発機構
JAEA-Testing-2011-007.pdf:46.74MB - 日本原子力研究開発機構
JAEA-Testing-2011-007.pdf:46.74MB - 日本原子力研究開発機構
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Contents<br />
1. Introduction<br />
2. What should be checked at first?<br />
<strong>JAEA</strong>-<strong>Testing</strong> <strong>2011</strong>-007<br />
<strong>JAEA</strong>-<strong>Testing</strong> <strong>2011</strong>-007<br />
(1) Check what needs to be done and by when.<br />
(2) Confirm policy of the national and local governments.<br />
3. Preparation<br />
(1) Gather workers and assign them tasks<br />
(2) Measure radioactivity before the work<br />
• Record 1: Radioactivity concentration of the pool water<br />
• Record 2: Ambient dose rate map of the swimming pool and pool side before<br />
the procedures<br />
• Record 3: Ambient dose rate map in the work area (before the procedures)<br />
(3) Procure materials and tools required for the work<br />
• Record 4: Material and tools list<br />
(4) Set a time schedule of the work<br />
• Record 5: Time schedule of the work<br />
4. Start decontamination procedures<br />
(1) Confirm that the safety of the workers is ensured.<br />
• Record 6: Record of personal dosimeters<br />
(2) Discharge pool water whose radioactivity concentration meets the criteria for<br />
drain<br />
• Record 7: Dose rate measured on the surface of bags that contains mud<br />
accumulated at the discharge flow path<br />
• Record 8: Radioactivity concentration of discharged water without<br />
decontamination treatment – Sampled at ( )<br />
- 95 -<br />
- 95 -