JAEA-Conf 2011-002 - 日本原子力研究開発機構

4. Results and discussion
The double differential cross sections obtained in our study are shown in Figs. 5, 6 and 7
for carbon, aluminium and copper targets, respectively. The error bars in the figures only
show statistical uncertainties. In each figure, the measured DDXs are shown together with
calculated ones by PHITS code.
In Fig. 5, the simulated results on carbon target generally agreed with the measured ones
at 10 and 15 degrees. The overestimations by PHITS code calculation were observed in the
energy region over 400 MeV at 5 degrees.
As is shown in Fig. 6 and Fig. 7, the result on aluminium and copper targets are similar to
the result on carbon target. The overestimation by PHITS code calculation was observed in
the energy region over 400 MeV at 5 degrees.
Fig. 5. Deuteron production DDXs for 290
MeV/u oxygen incidence on carbon target,
together with the PHITS code calculations
(solid lines).
JAEA-Conf 2011-002
Fig. 6. Deuteron production DDXs for 290
MeV/u oxygen incidence on aluminium target,
together with the PHITS code calculations
(solid lines).