MATERIAL SAFETY DATA SHEET – MSDS Product Name ... - WEG

More documents

Recommendations

Info

MATERIAL SAFETY DATA SHEET – MSDS Product Name: DILUENT POLI W 1104 EXP Last revision date:10/12/08 Page: 2 / 7 After skin contact : After eye contact : Remove exposed or contaminated material. Remove product with vegetal oil (coking oil). Wash contaminated skin with plenty water. Do not wash contaminated skin with thinner or solvent. Seek medical attention if any skin irritation or adverse reaction or other symptoms occurs. In case of contact, immediately flush eyes with plenty of water for at last 15 minutes. Remove contact lens, if any. Victim must see k immediate medical attention. Take copy of label and MSDS to health professional with victim, if possible. Call physician. After ingestion: Do not induce vomit. Call a doctor immediately . Action to be prevented: Induce vomit. Brief description o f the main symptoms and effects : Headaches, dizziness, fat igue, and in extreme cases, uncon sciousness. Notes to the doctor : Make symptomatic treatment . Do not induce vomiting . The gastric-cleaning is indicate when the pacient intromit a big quantity, m ore than 5 ml of the substance in the pure form . The toxic potencial of quantity intromited must be valued according to the risk of aspiration of the gastric -cleaning. The ativate coal in solution must be useful. However, in same cases the coal induce vomi ting. 5. FIRE FIGHTING MEASURES Fire fighting measures: Water Spray, Foam, Dry Chemical, CO2. For safeting reasons unsuitable extinguishing agents : Water jet, extintor de gás carbônico. Specific Risks: The fine particles dispense will take fo rm to the explosive mixtures in the air . In case of fire or dense black fumes, the harmful decomposition products inhalation can provoke health problems. Especial Methods : Refresh closed receptacles arou nd the fire. Evacuate the area and combat the fir e at a safe distance. Use dikes to contain the water used in the combat and eliminate it according to the local legislation. Use water under fog form to cool the recipients exposed to the fire. In case of intense fire in stor age area, use rubber hoses hand led at distance. Firefighter protection : Firefighters m ust wear self-contained breathing apparatus and full protective equipment. 6. SPILL / LEAK CONTROL PROCEDURES Personal protective equipment : Proper personal prot ective equipment should be use d. Evacuate immediate area. Avoid inhalation of fogs/vapor and direct contact with product. Do not smoke. Eliminate all sources of ignition : Eliminate and/or isolate all sources of ignition. Signal and ventilate area of spill. Use non-sparking tools. Dust control: Not applicable, since it is a liquid product. Prevention of inhalation, skin absorption, contact with eyes and mucous membranes : Proper personal protective equipment should be used, such as: face mask with OV filter (Organic Vapors) and goggles. Environment protection : Prevent material or firef ighting waste wat er from entering into sewer and rive r beds. In case of si gnificant sp ill, retain spilled liquid with inert material, such as sand or e arth. If suitable, absorb spilled liqui d with absorbent WEG TINTAS Rodovia BR 280, Km 50 - Fone: (47) 3276-4000 - Fax: (47) 3276-5500 - CEP 89270-000 - Guaramirim – SC EMERGÊNCIA: (11) 5012 -5311 - E-mail: tintas@weg.net - www.weg.net
MATERIAL SAFETY DATA SHEET – MSDS Product Name: DILUENT POLI W 1104 EXP Last revision date:10/12/08 Page: 3 / 7 materials, such as sawdust, cotton waste or other suitable materials Cleaning Procedures : Recovery: Elimination: HANDLING Technical Measures Exposure Control – Personal Protection : Fire and Exp losion Prevention: Safe Handling Precaution: Safe Handling Information : Remove contaminated diking mater ial with a vacuum-truck and transfer it to an emergency tank. Eart h all used equipment. Maintain p roduct in closed emergency containers prope rly labeled for later recovery or disposal. Incinerate all contamin ated material in authorized plant. Do not pour the product into sewers. The final disposal of this material should be followed -up by disposal experts and made in accordance with the environmental regulations. 7. HANDLING AND STORAGE The use of face mask with OV filter (Org anic Vapors) is recommended . Use appropriate eye protect ion in case of eventual chemical splash eye contact exists. Wear rubber gloves to avoid direct conta ct of the product with the skin. Adequate local exhausting ventilation should be provided t o keep vapor concentration below explosive limits. All conductive parts of the system in contact with the product shall be grou nded electrically. Do not smoke in the working area. Handling of the product respecting the rules of security and industrial hygiene . Emergency shower and eyes washer must be installed in areas of use and storage. § Prevent contact with the skin, mucosa, eyes and vapor inhalation; § Do not reuse the packing; § Do not smoke, eat or drink in the storage area. § Wash the hands after handling. § Store in a cool, dry area far from high temperatures, flames and oxidizers . STORAGE Technical appropriate measures : The electrical installation must meet the requirements of the stand ards NEC (National Electrical Code) or IEC (Internationa l Electrical Commission) and/or ABNT (Brazilian Association of Techni cal Standards). The floor of the storage area must be waterproof, not combustible and shall be provided with outfall ditches for dr aining the product to damming tanks. Stora ge tanks must be surrounded by damming tanks and fitted with draining devices to enable fast drainage in case of leakage . Storage Conditions : Suitable: Avoid: Non-compatible Products and Materials : Store the product in a dry, well -ventilated covered are a with good marking. Keep this product away from heat and sparking sources, away from foods and strong oxidizer. Keep conta iners always closed and w ell identified. Avoid to exposing the product to high temperatures, rain or direct sunlight Exposure. Do not store with explosive materials, inflammable and/or toxic gases, oxidants substances, corrosive and material that can suffer spontaneous combustion . Safe materials for packaging : Recommended : Metallic and/or amber type glass containers Inadequate: Some plastic materials . WEG TINTAS Rodovia BR 280, Km 50 - Fone: (47) 3276-4000 - Fax: (47) 3276-5500 - CEP 89270-000 - Guaramirim – SC EMERGÊNCIA: (11) 5012 -5311 - E-mail: tintas@weg.net - www.weg.net
Page 1: MATERIAL SAFETY DATA SHEET - MSDS P
Page 5 and 6: MATERIAL SAFETY DATA SHEET - MSDS P
Page 7: MATERIAL SAFETY DATA SHEET - MSDS P

MATERIAL SAFETY DATA SHEET – MSDS Product Name ... - WEG

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?