SECURITYWARE PRODUCTS Heavy duty, vandal resistant ...

SECURITYWARE PRODUCTS 

Heavy duty, vandal resistant plumbing products for use in extreme conditions

Franke Kindred Canada Limited 

Franke Kindred Canada Limited has been an integral player in the development of stainless steel 

plumbing fixtures for more than 60 years. By any measure, that’s a lot of experience, and with that 

tenure comes a hard earned reputation for superior quality stainless steel plumbing fixtures, backed 

by a solid manufacturer’s warranty. 

The Kindred Commercial product offering includes stainless steel plumbing fixtures and fittings 

suitable to application in Hospitals, Restaurants, Commercial Washrooms, and public buildings, and 

more recently the offering has expanded to include Commercial Securityware products. Included in 

this range are heavy duty 14 gauge stainless steel washroom fixtures for application in facilities such 

as prisons and public use buildings where vandal resistant products are required. 

Key Features of Kindred Commercial Securityware 

■ All Kindred Commercial securityware fixtures are fabricated from robust 14 gauge stainless steel 

for durability and superior performance in extreme conditions. 

■ Stainless steel by nature is hygienic and is an easy to clean material …. well suited to repetitive 

and high use applications. 

■ Kindred Commercial securityware fixtures feature seamless construction for high resistance to 

vandalism and tampering. 

■ All Kindred Commercial Securityware plumbing fixtures are cUPC certified.

Section 1 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .01 

Section 2 Combi Units, Water Closets & Urinals . . . . . . . . . . . . . . . . . .06 

Section 3 Wash Basins & Sinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 

Section 4 Drinking Fountains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 

Section 5 Accessories & Shower Panels . . . . . . . . . . . . . . . . . . . . . . . . . .40

General Information

■ Ordering Process and Corrosion Resistance Information 

■ Nomenclature Guide for Fixtures and Options 

■ Installation 

■ Care and Maintenance 

■ Warranty and Product Certification 

■ How to Order a Kindred Commercial Securityware Fixture 

SECTION 1 

1 

GENERAL 

INFORMATION 

GENERAL 

INFORMATION 

GENERAL 

INFORMATION 

GENERAL 

INFORMATION 

GENERAL 

INFORMATION

General Information 

ORDERING PROCESS 

The Kindred Commercial Securityware offering includes washroom fixtures, fittings and accessories for use in extreme 

use applications such as prisons and public restrooms. Fixtures are constructed of heavy 14 gauge, type 304 Stainless 

steel, with seamless welds for high vandal resistance. Products are finished in easy to maintain satin, with hygienic mirror 

finish seats on water closets and combi units. Kindred Commercial Securityware standard valves are constructed of brass 

for superior longevity. 

Most securityware products are available with a number of valve and fitting options. For your convenience we have included a "HOW TO ORDER" 

example in this section to illustrate selection of options, and in turn ease the ordering process. Please reference our website www.kindred-commercial.com 

for more information and a link to the service. 

Please contact us for pricing information: 

Telephone: 1-866-687-7465 

email: info@franke.com 

CORROSION RESISTANCE INFORMATION 

In the presence of oxygen, stainless steel forms a protective chromium oxide film. This is due to the addition of chromium in excess of 11.5% during 

the alloying stage. The further addition of nickel, in excess of 7%, gives superior corrosion resistance to the 300 series. 

Maximum corrosion resistance is obtained with the addition of molybdenum to form TYPE 316, designed to resist attack under highly corrosive conditions. 

As implied, stainless steel requires oxygen in order to be stainless. There are ways to make oxygen more plentiful. For example, an acid solution which 

might otherwise corrode the steel, can be aerated to maintain the protective film. 

Corrosion, or rusting, often reported soon after installation, has two main causes: 

1. Contact Corrosion occurs when a piece of common carbon steel, copper, brass or other foreign material contacts the sink and destroys the passive 

protective film. 

2. Pitting or Pinhole Corrosion occurs when chlorides attack the steel forming pits where galvanic cells are created. Acid chlorides are particularly 

severe, but even chlorine bleach can cause failure. The fixture should be rinsed thoroughly after such contact. 

For a detailed listing of corrosive materials and steel resistance levels, please go to: http://www.kindred-commercial.com 

2 1110


NOMENCLATURE GUIDE FOR FIXTURES 

Combi Units 

HDCU1318 Heavy Duty Combi Unit 13” front to back x 18” left to right basin 

Water Closets 

HDWC2414 Heavy Duty Waste Closet 24" front to back x 14" left to right 

Urinals 

HDU1314 Heavy Duty Urinal 13” front to back x 14” left to right 

Wash Basins 

HDSB1318 Heavy Duty Scrub Basin 13” front to back x 18” left to right 

HDPWB1518 Heavy Duty Public Wash Basin 15” front to back x 18” left to right 

AHDWB1918 Accessible Heavy Duty Wash Basin 19” front to back x 18” left to right 

Drinking Fountains 

HDDF1818 Heavy Duty Drinking Fountain 18” front to back x 18” left to right 

Mop & Service Sinks 

HDWSS1821 Heavy Duty Wall Service Sink 18” front to back x 21” left to right 

HDFSS1821 Heavy Duty Floor Service Sink 18” front to back x 21” left to right 

Accessories 

RH320 Roll Holder 

HDTX674 Heavy Duty Triple roll holder 

TD350 Tissue Dispenser 

GB445 Garbage Bin 

SD300 Soap Dispenser 

NOMENCLATURE GUIDE FOR OPTIONS 

Fixture orientation 

L Left 

R Right 

C Center 

Installation Method 

RM Rear mount with threaded rod and hardware included. 

FM Front mount with hidden access. Tamper resistant security screws and wall hanger bracket included. 

WS Wall Sleeve 

MT Metal Cutout Template 

Valves 

SV Single temperature air operated valve 

DV Dual temperature air operated valve 

MV2 Manifold valve to control 2 fixtures 

FVC Flush Valve Combination Unit 

FVU Flush Valve Urinal 

FVT Flush Valve Water Closet (Toilet) 

1110 

3 

GENERAL 

INFORMATION 

COMBI UNITS, WATER CLOSETS 

& URINALS 

GENERAL 

INFORMATION 

GENERAL 

INFORMATION 

GENERAL 

INFORMATION


INSTALLATION 

Kindred Commercial Securityware fixtures are intended for vandal resistant installation, with tamper proof hardware. Depending on the fixture type 

installation methods may be: 

a. Rear mount through the wall, for use when a pipe chase is available. 

b. Or, front mount using wall hanger brackets when the fixture is not serviceable from a pipe chase. 

Please refer to the product specific page for more information on installation methods, rough-ins, hardware, and fittings options. 

CARE AND MAINTENANCE 

Kindred Commercial’s endorsement of stainless steel fixtures is based on over 50 years of manufacturing experience. Over this time we have accumulated 

a wealth of knowledge with respect to care of this product. We would like to share some of this insight with you, as well as advise you of some 

recommended cleaning materials and instructions for maintaining our product. 

To clean your fixture, use the mildest cleaning procedure that will do the job effectively. DO NOT USE ANY ABRASIVE MATERIALS ON MIRROR FINISH. 

On satin finish surfaces we recommend using a very mild abrasive cleanser such as Old Dutch ® or Cameo ® . 

Always rinse the fixture after using a cleaning agent, and wipe the fixture dry to discourage any water spotting. 

Metallic scouring pads and steel wool pads must never be used to clean your fixture, as they will leave a residue of small iron particles. They may not even 

be readily visible, but they most certainly will lead to corrosion of the fixture. (Non metallic Scotch-Brite ® scouring pads are available for this purpose.) 

We don’t recommend that you use chlorine bleach in your stainless steel fixture, as chlorine will attack the protective layer that makes stainless steel 

truly stainless. The risk of damage is proportional to the concentration of the chlorine and the duration of exposure between the fixture and chlorine 

agent. Always dilute any antibacterial product used and wipe up any spills. Note: some antibacterial soaps contain a chlorine compound. 

Any cleaning or scrubbing to remove stubborn stains from the inside of the fixture bowl should follow the direction of the grain line. Any scrubbing 

across the grain will show as a scratch. Scrubbing in the same direction as the polish lines will blend in any surface scratches. 

Stains and water spots anywhere on the fixture can be removed with a small amount of Peek on a damp cloth. Rub the Peek over the fixture surface. 

Rinse and towel dry. 

LIMITED BUYER WARRANTY 

Kindred Commercial Securityware fixtures carry a five year warranty against manufacturer’s defects. 

Kindred Commercial Securityware fittings carry a one year warranty against manufacturer’s defects. 

PRODUCT CERTIFICATION 

Kindred Commercial strongly believes in product testing and certification. We strive to have our products designed and tested to meet all 

applicable standards. 

All Kindred Commercial Securityware Combination Units, Urinals and Water Closets (toilets) are certified and tested to 

ASME A119.12.2-2008/CSA B45.1-08 standards. 

All Kindred Commercial Securityware Combination Wash Basins and Sinks are certified and tested to 


All Kindred Commercial Securityware valves tested to ASME A112.18.1-2005/CSA B125.1-05 standards. 

4 1110

6 

Combi Units, Water Closets & Urinals

■ 14 gauge type 304 

■ Combi Units 

■ Water Closets 

■ Urinals 

SECTION 2 

7 

GENERAL 

INFORMATION 


& URINALS 

GENERAL 

INFORMATION 

GENERAL 

INFORMATION 

GENERAL 

INFORMATION

14 

Wash Basins & Sinks

■ 14 gauge type 304, 18-10 stainless steel 

■ Front and Rear Mounted Security Basins 

■ Public Use Basins 

■ Front and Rear Mounted Service Sinks 

SECTION 3 

15 

GENERAL 

INFORMATION 


& URINALS 

WASH BASINS 

& SINKS 

GENERAL 

INFORMATION 

GENERAL 

INFORMATION

HDPWB1518 Heavy Duty Public Wash Basin 

15" 

(38cm) 

4" 

(10cm) 

1" (3cm) 

HDPWB1518 shown 

2 1 

4 

18" (46cm) 

17" 

(43cm) 

5" 

(13cm) 

3 

Fixture Specification: 

This Heavy Duty Public Wash Basin is designed for areas requiring the 

utmost in vandal resistance. The fixture is fabricated from heavy 14 gauge 

type 304 18-10 stainless steel and polished to a satin finish. 

These fixtures are designed to be installed onto finished walls by means of 

a wall hanger bracket. Supply and waste lines must be roughed out of wall 

for connection. Wall anchor hardware (bolts and anchors) are not included. 

Compartment Size: (FB x LR x D): 

15" (38cm) x 18" (53cm) x 17" (43cm) 

Bowl Size: (FB x LR x D): 

9 1/2" (24cm) x 16" (41cm) x 5" (13cm) 

The fixture is tested and certified to: 


Installation: 

These fixtures are designed to be installed onto finished walls which are not 

accessible from a pipe chase. Installation is achieved by means of a wall 

hanger bracket and lower mounting holes.. 

FIXTURE OVERVIEW: 

1 Deck Faucet Holes (please specify) 

2 Integral Soap Dish 

3 1 1/4” Grid Strainer 

4 

Wall Hanger Bracket 

AVAILABLE WALL MOUNTED ACCESSORIES: 

Security Mirror (12" x 16") M1216 



Centrefeed Paper Roll Box TD350 

Soap Dispenser SD300 

24 1110

34 

Drinking Fountains

■ Vandal resistant seamless welds, and easy to clean satin finish. 

■ Chrome plated lead free brass bubbler, and single temperature air operated 

metering valve with non-hold open feature included. 

■ 14 gauge, Type 304 18-10 stainless steel. 

SECTION 4 

35 

GENERAL 

INFORMATION 


& URINALS 

BASINS 

& SINKS 

DRINKING 

FOUNTAINS 

GENERAL 

INFORMATION

HDDF1818-RM Heavy Duty Drinking Fountain 

1" 

(3cm) 

18" 

(46cm) 

4" (10cm) 

1 

HDDF1818-RM shown 

18" (46cm) 

11" 

(28cm) 

2 

3 

3" 

(7cm) 


This Heavy Duty Drinking Fountain is designed for areas requiring the 


type 304 18-10 stainless steel. It is seamlessly welded and polished to a 

satin finish. The drinking bubbler is chrome plated lead free brass. 


18" (46cm) x 18" (46cm) x 11" (28cm) 


8 1/2" (22cm) x 14 1/4" (37cm) x 1 1/2" (4cm) 



Installation: 

These fixtures are designed to be installed onto finished walls which are 

serviceable from a pipe chase. Installation is achieved by threading (4) 1/2” 

(13mm) diameter threaded anchor rods to the back of the fixture. The 

anchor rods are then secured on the chase side of the wall by supplied 

hardware. (Standard included hardware is for walls up to 8" (20cm) thick). 

For existing walls, an optional metal cutout template is available. For new 

block (CMU) or poured concrete walls, an optional wall sleeve is available. 

Available Controls: 

The bubbler is controlled with an air-operated self closing valve with a nonhold 

open feature. Flow time is adjustable from approximately 5 to 60 

seconds. The valve is operated by a vandal resistant push button which 

requires less than 5lbs to operate. The valve can be mounted up to 10 feet 

(3meters) away from the push button. Valve conforms to the requirements 

of ASME A112.18.1-2005/CSA B125.1-05. 


1 Deck Mounted Bubbler 

2 Push Button Actuator 

3 

1.5” Waste Outlet 

36 1110

HDDF1818-FM Heavy Duty Drinking Fountain 

1" 

(3cm) 

18" 

(46cm) 

13" 

(33cm) 

1 

4" (10cm) 

4 

HDDF1818-FM shown 

18" (46cm) 

2 

5 

9" 

(23cm) 

3 


This Heavy Duty Drinking Fountain is designed for areas requiring the 


type 304 18-10 stainless steel. It is seamlessly welded and polished to a 

satin finish. The drinking bubbler is chrome plated lead free brass. 


18" (46cm) x 18" (46cm) x 13" (33cm) 


8 1/2" (22cm) x 14 1/2" (37cm) x 1 1/2" (4cm) 



Installation: 

These fixtures are designed to be installed onto finished walls which are not 

accessible from a pipe chase. Installation is achieved by means of a wall 

hanger bracket and lower mounting holes. Mounting hardware and plumbing 

is all self contained and only accessed by a removable panel. The panel is 

secured with tamper resistant screws. 


The bubbler is controlled with an air-operated self closing valve with a nonhold 

open feature. Flow time is adjustable from approximately 5 to 60 

seconds. The valve is operated by a vandal resistant push button which 

requires less than 5lbs to operate. The valve can be mounted up to 10 feet 

(3meters) away from the push button. Valve conforms to the requirements 

of ASME A112.18.1-2005/CSA B125.1-05. 


1 Deck Mounted Bubbler 

2 Push Button Actuator 

3 1.5” P Trap 

4 Removable Panel 

5 

Wall Hanger Bracket 

38 1110

40 

Accessories & Shower Panels

■ Rear mounted stainless steel mirrors and Heavy duty shower panel. 

Optional metal cutout template and wall sleeve for poured concrete 

installation applications. 

■ Stainless steel toilet roll holders, waste bins, and soap dispensers. 

■ Vandal resistant seamless welds, and easy to clean satin finish on all 

accessories except mirrors. 

■ Shower panel includes integral soap dish and air operated single 

temperature (pre-mixed water) metering valve with non-hold open feature. 

■ 14 gauge, Type 304 18-10 stainless steel. 

SECTION 5 

41 

GENERAL 

INFORMATION 


& URINALS 

BASINS 

& SINKS 

DRINKING 

FOUNTAINS 

ACCESSORIES & 

SHOWER PANELS

HDSP2408-RM Heavy Duty Shower Panel 

3" 

(8cm) 

24" 

(61cm) 

HDSP2408-RM shown 

8" (20cm) 

1 

2 

3 


This Heavy Duty Shower Panel is designed for areas requiring the utmost in 

vandal resistance. The fixture is fabricated from heavy 14 gauge type 304 

stainless steel. It is seamlessly welded and polished to a satin finish. 

Shower Panel 

Shower head has a flow rate of 9L/min (2.4gpm). Equipped with an air 

operated self closing valve adjustable from approximately 5 to 60s. 


24" (61cm) x 8" (20cm) x 3" (8cm) 

Installation: 


serviceable from a pipe chase. Installation is achieved by threading (6) 1/2” 

(13mm) diameter anchor rods to the back of the fixture. The anchor rods are 

then secured on the chase side of the wall with supplied hardware. (Standard 

included hardware is for walls up to 8" (20cm) thick). 




The shower is controlled with an air-operated self closing valve with a non-hold 

open feature. Flow time is adjustable from approximately 5 to 60 seconds. 

The valve is operated by a vandal resistant push button which requires less 

than 5lbs to operate. The valve can be mounted up to 10 feet (3meters) away 

from the push button. Valve conforms to the requirements of ASME 

A112.18.1-2005/CSA B125.1-05. 


1 Shower Spout 

2 Valve Actuator Button 

3 

Soap Dish 

42 1110

SC1-RM Heavy Duty Shower Components 

3 1/2" 

[9cm] 

72 3/4" 

[185cm] 

Recommended 

SC1-RM shown 

7 1/2" [19cm] 

7 1/2" [19cm] 

1 

3 1/2" 

[9cm] 

2 


This Heavy Duty Shower is designed for areas requiring the utmost in vandal 

resistance. The fixture is fabricated from heavy 14 gauge type 304 stainless 

steel. It is seamlessly welded and polished to a satin finish. 

Shower head has a flow rate of 9L/min (2.4gpm). Equipped with an air 

operated self closing valve adjustable from approximately 5 to 60s. 

Installation: 


serviceable from a pipe chase. Installation is achieved by threading 1/2” 

(13mm) diameter anchor rods to the back of the fixture plate. The anchor 

rods are then secured on the chase side of the wall with supplied hardware. 

(Standard included hardware is for walls up to 8" (20cm) thick). 




The shower is controlled with an air-operated self closing valve with a non-hold 

open feature. Flow time is adjustable from approximately 5 to 60 seconds. 

The valve is operated by a vandal resistant push button which requires less 

than 5lbs to operate. The valve can be mounted up to 10 feet (3meters) away 

from the push button. Valve conforms to the requirements of ASME 

A112.18.1-2005/CSA B125.1-05. 


1 Shower Spout 

2 Valve Actuator Button 

44 1110

M1216 Heavy Duty Mirror 

16" 

(41cm) 

M1216 

11" 

(28cm) 

12" 

(30cm) 

15" 

(38cm) 

12" x 16" Rear Mounted 


This Heavy Duty Rear Mounted Mirror is designed for installation into high 

security institutions. It is seamlessly welded 14 gauge, 18-10 T304 

stainless steel. 

Installation: 

Installation is achieved via (4) 3/8" threaded rods secured from within the 

pipe chase. Included hardware is for walls up to 8" thick. 

APPROVED FOR MANUFACTURE 

Customer: 

Name and Title (print): 

Signature: 

The latest rough in information is supplied with each fixture. Do not rough in without first verifying 

dimensions. Franke Kindred Canada reserves the right to make design and specification changes without 

prior notice. Franke Kindred Canada will not assume any responsibility for the use of obsolete data. Please 

visit www.kindred-commercial.com for the latest specifications. 

46 1110 

Date: 

Quantity: 

Model:


1110 

24" 

(61cm) 

M1224 

11" (28cm) 

12" (31cm) 

10 1/2" 

(27cm) 

10 1/2" 

(27cm) 

1 1/2" 

(4cm) 






Installation: 




Customer: 


Signature: 

Date: 

Quantity: 

Model: 





47 

GENERAL 

INFORMATION 


& URINALS 

BASINS 

& SINKS 

DRINKING 

FOUNTAINS 

ACCESSORIES & 

SHOWER PANELS


40" 

(102cm) 

M2440 

22" (56cm) 

24" (61cm) 


18 1/2" 

(47cm) 

1 1/2" 

(4cm) 

37" 

(94cm) 





Installation: 




Customer: 


Signature: 





48 1110 

Date: 

Quantity: 

Model:

RH320 Heavy Duty Jumbo Roll Toilet Paper Dispenser 

1110 

9 7/16" 

[24cm] 

1 5/8" 

[4cm] 

9 7/16" [24cm] 

RH320 

12 11/16" 

[32cm] 

12 9/16" [32cm] 5 1/8" 

[13cm] 

Specification: 

This Heavy Duty Jumbo Roll Toilet Paper Dispenser is designed for 

installation into high security institutions. It is seamlessly welded 14 gauge 

18-10 T304 stainless steel. Keyed access is required to refill this unit. 

Installation is achieved by mounting this unit to a wall using supplied 

hardware. 


Customer: 


Signature: 

Date: 

Quantity: 

Model: 





49 

GENERAL 

INFORMATION 


& URINALS 

BASINS 

& SINKS 

DRINKING 

FOUNTAINS 

ACCESSORIES & 

SHOWER PANELS

HDTX674 Heavy Duty Triple Toilet Roll Dispenser 

13 3/4" 

(35cm) 

1 9/16" 

(4cm) 

3 1/8" 

(8cm) 

5 1/8" 

(13cm) 

HDTX674 

16 5/16" 

(41cm) 

5 7/8" 

(15cm) 


This Heavy Duty Triple Toilet Roll Dispenser is designed for installation into 

high security institutions. It is seamlessly welded 14 gauge 18-10 T304 

stainless steel. Keyed access is required to open this unit to refill standard 

toilet paper rolls. 


hardware. 


Customer: 


Signature: 





50 1110 

Date: 

Quantity: 

Model:

RH140HD Heavy Duty Toilet Paper Dispenser 

1110 

9/16" 

(1cm) 

9/16" 

(1cm) 

3 1/8" 

(8cm) 

9/16" 

(1cm) 

4 5/16" 

(11cm) 

5 1/2" 

(14cm) 

RH140HD 

9/16" 

(1cm) 

4 5/16" 

(11cm) 

4 5/16" 

(11cm) 


This Heavy Duty Toilet Roll Dispenser is designed for installation into high 

security institutions. It is seamlessly welded 14 gauge 18-10 T304 stainless 

steel. Keyed access is required to refill this unit. 


hardware . 


Customer: 


Signature: 

Date: 

Quantity: 

Model: 





51 

GENERAL 

INFORMATION 


& URINALS 

BASINS 

& SINKS 

DRINKING 

FOUNTAINS 

ACCESSORIES & 

SHOWER PANELS

TD350 Heavy Duty Paper Towel Dispenser 

1 3/16" 

[3cm] 

11 11/16" 

[30cm] 

8 5/8" [22cm] 

10 3/16" [26cm] 

TD350 

3/4" [2cm] 

13 7/8" 

[35cm] 

5" [13cm] 


Jumbo roll holder for wall mounting, stainless steel, surface satin finished, 

material thickness 14G (2 mm) type 304 18-10, casing is held in place by 

a stainless steel rod fixed to the mounting plate and a security lock, paper 

withdrawal over two tear-off edges, for 1 roll with max. Ø 300 mm, incl. 

stainless steel screws and dowels. 


Customer: 


Signature: 





52 1110 

Date: 

Quantity: 

Model:

GB445 Heavy Duty Waste Bin 

1110 

14 9/16" 

(37cm) 

2 3/8" 

(6cm) 

14 9/16" (37cm) 

16 1/8" (41cm) 

GB445 

17 11/16" 

(45cm) 

8 7/8" 

(23cm) 


This Heavy Duty Waste Bin is designed for installation into high security 

institutions. It is seamlessly welded 14 gauge 18-10 T304 stainless steel. 

Keyed access is required to open this unit to remove waste bag. 


hardware. 


Customer: 


Signature: 

Date: 

Quantity: 

Model: 





53 

GENERAL 

INFORMATION 


& URINALS 

BASINS 

& SINKS 

DRINKING 

FOUNTAINS 

ACCESSORIES & 

SHOWER PANELS

SD300 Heavy Duty Paper Soap Dispenser 

10 11/16" 

[27cm] 

1 1/8" 

[3cm] 

3 11/16" 

[9cm] 

5" [13cm] 

SD300 

12 9/16" 

[32cm] 

5 1/16" 

[13cm] 


This Heavy Duty Soap Dispenser is designed for installation into high 

security institutions. It is seamlessly welded 14 gauge 18-10 T304 stainless 

steel. The dispenser is compatible with standard liquid soaps. Keyed access 

is required to refill this unit. 


hardware. 


Customer: 


Signature: 





54 1110 

Date: 

Quantity: 

Model:

1110 

55 

GENERAL 

INFORMATION 


& URINALS 

BASINS 

& SINKS 

DRINKING 

FOUNTAINS 

ACCESSORIES & 

SHOWER PANELS

In Canada 

Franke Kindred Canada Limited 

1000 Franke Kindred Road 

Midland, ON L4R 4K9 CANADA 

www.kindred-commercial.com 

info.fkc@franke.com 

Telephone: 1-866-687-7465 

Fax: 1-800-361-8408 

Printed in Canada 

61735 

1110

SECURITYWARE PRODUCTS Heavy duty, vandal resistant ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?